106671-8092 ZEXEL 9 400 616 973 BOSCH INJECTION-PUMP ASSEMBLY 9400616973 1066718092 220005952a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106671-8092 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 973 9400616973

ZEXEL 106671-8092 1066718092

HINO 220005952A 220005952a

Service parts 106671-8092 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106060-7841

3. GOVERNOR 105489-1251

4. SUPPLY PUMP 105237-1600

5. AUTOM. ADVANCE MECHANIS 105681-5060

6. COUPLING PLATE 105663-0540

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-5721

11. Nozzle and Holder 236001970B

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105031-5470

14. NOZZLE

105015-7020

15. NOZZLE SET

Include in #1:

106671-8092 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 973 9400616973

ZEXEL 106671-8092 1066718092

HINO 220005952A 220005952a

Zexel num

Bosch num

Firm num

Name

106671-8092

9 400 616 973

220005952A HINO

INJECTION-PUMP ASSEMBLY
K13C * K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-1720

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-4-2-6- 3-5

Pre-stroke mm 4.4 4.34 4.4

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.75 60.25

Difference between angles 2
Cyl.1-2 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cal 1-3 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-5 deg. 300 299.75 300.25

Injection quantity adjustment

Adjusting point A

Rack position 9.6

Pump speed r/min 650 650 650

Average injection quantity mm3/st. 195.5 193.5 197.5

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the lever *

Boost pressure kPa 33.3 33.3

Boost pressure mmHg 250 250

Injection quantity adjustment_02

Adjusting point B

Rack position 9.7

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 203.4 200.4 206.4

Max. variation between cylinders % 0 -5 5

Fixing the lever *

Boost pressure kPa 33.3 33.3

Boost pressure mmHg 250 250

Injection quantity adjustment_03

Adjusting point D

Rack position 4.2+-0.5

Pump speed r/min 225 225 225

Average injection quantity mm3/st. 12.5 9.5 15.5

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_04

Adjusting point E

Rack position 7

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 131.5 129.5 133.5

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 650 650 650

Rack position 7

Boost pressure kPa 3.3 3.3 5.3

Boost pressure mmHg 25 25 40

Boost compensator adjustment_02

Pump speed r/min 650 650 650

Rack position 9.6

Boost pressure kPa 13.3 13.3 13.3

Boost pressure mmHg 150 150 150

Timer adjustment

Pump speed r/min 700--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 650

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1000

Advance angle deg. 3 2.7 3.3

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Tolerance for racks not indicated: +-0.05mm. (4)RACK LIMIT (5)Set idle at delivery (6)Damper spring setting
----------
RT=0.8 TH=2.4mm
----------

Speed control lever angle

F:Full speed
----------

----------
a=15deg+-5deg

0000000901

F:Full load I:Idle (1)R = aa (2)Set point D (3)At delivery
----------
aa=45mm
----------
a=25deg+-5deg b=45deg+-3deg c=47deg+-5deg

Stop lever angle

N:Engine manufacturer's normal use S:Stop the pump. (1)Rack position = aa (2)Rack position bb (3)Free (at delivery) (4)Set the stopper bolt (apply red paint).
----------
aa=12mm bb=2.5-0.5mm
----------
a=40deg+-5deg b=30deg+-5deg c=(50deg)