101603-2631 ZEXEL 9 400 611 698 BOSCH INJECTION-PUMP ASSEMBLY 9400611698 1016032631


101603-2631 INJECTION-PUMP ASSEMBLY
Rating:
13
Buy INJECTION-PUMP ASSEMBLY 101603-2631 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 698 9400611698
ZEXEL 101603-2631 1016032631

Service parts 101603-2631 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-5310
3. GOVERNOR 105401-0861
4. SUPPLY PUMP 105210-5560
5. AUTOM. ADVANCE MECHANIS 105672-0560
6. COUPLING PLATE 105662-1160
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4100
11. Nozzle and Holder 23600-2710A
12. Open Pre:MPa(Kqf/cm2) 17.7{180}
13. NOZZLE-HOLDER 105030-4440
14. NOZZLE 105015-9220
15. NOZZLE SET

Include in #1:

101603-2631 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 611 698 9400611698
ZEXEL 101603-2631 1016032631


Zexel num
Bosch num
Firm num
Name
101603-2631 
101603-2632 
9 400 611 698 
   
INJECTION-PUMP ASSEMBLY
* K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-0920
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   4.8 4.77 4.83
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.75 60.25
Difference between angles 2
Cyl.1-2
deg.   120 119.75 120.25
Difference between angles 3
Cal 1-6
deg.   180 179.75 180.25
Difference between angles 4
Cal 1-3
deg.   240 239.75 240.25
Difference between angles 5
Cal 1-5
deg.   300 299.75 300.25
Injection quantity adjustment
Adjusting point   A
Rack position   11.8
Pump speed r/min   1300 1300 1300
Average injection quantity mm3/st.   121.5 119.5 123.5
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the lever   *
Boost pressure kPa   37.3 37.3
Boost pressure mmHg   280 280
Injection quantity adjustment_02
Adjusting point   -
Rack position   6.2+-0.5
Pump speed r/min   550 550 550
Average injection quantity mm3/st.   10 9 11
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Boost compensator adjustment
Pump speed r/min   800 800 800
Rack position   R1-0.7
Boost pressure kPa   10.7 10.7 12
Boost pressure mmHg   80 80 90
Boost compensator adjustment_02
Pump speed r/min   800 800 800
Rack position   R1(11.8)
Boost pressure kPa   24 24 24
Boost pressure mmHg   180 180 180
Timer adjustment
Pump speed r/min   -
Advance angle deg.   0 0 0
Remarks
Measure speed (beginning of operation).
 
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   1.5 1.2 1.8
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101603-2631
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)SMA RACK LIMIT; RAL (boost pressure exceeds P1 at N = N1) (4)Boost compensator stroke (5)Set idle sub-spring (6)Main spring setting (7)Perform governor adjustment at an ambient temperature of at least 15 deg C (rack limit spring is shape memory alloy).
----------
K=13 RAL=13.1+-0.1mm N1=350r/min P1=37.3kPa(280mmHg)
----------

Speed control lever angle

Test data 101603-2631
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=16deg+-5deg b=24deg+-5deg

Stop lever angle

Test data 101603-2631
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Normal stop (3)Stopper bolt setting (4)Stopper bolt setting (5)Use the hole above R = cc
----------
aa=0r/min bb=1-0.5mm cc=25mm
----------
a=13deg+-5deg b=50deg+-5deg

Timing setting

Test data 101603-2631
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(50deg)




Have questions with 101603-2631?





Group cross 101603-2631 ZEXEL

Hino 

F 019 Z20 468 
220401410A 
INJECTION-PUMP ASSEMBLY
J-2
F 019 Z20 469 
220401411A 
INJECTION-PUMP ASSEMBLY
J-2
9 400 615 058 
220401412A 
INJECTION-PUMP ASSEMBLY
J-2
 
220401430A 
INJECTION-PUMP ASSEMBLY
J-2
9 400 611 597 
220401431A 
INJECTION-PUMP ASSEMBLY
J-2
F 01G 09U 045 
220401432A 
INJECTION-PUMP ASSEMBLY
J-2
9 400 619 847 
220401310A 
INJECTION-PUMP ASSEMBLY
J-2
F 01G 09U 1BH 
220401311A 
INJECTION-PUMP ASSEMBLY
J-2
 
220205510A 
INJECTION-PUMP ASSEMBLY
H07C-TE
101603-2631  

101603-2632 
9 400 611 698 
 
INJECTION-PUMP ASSEMBLY

Hino 

9 400 611 993 
220205510B 
INJECTION-PUMP ASSEMBLY
H07C-TE
 
220205620A 
INJECTION-PUMP ASSEMBLY
H07C-T
 
 
INJECTION-PUMP ASSEMBLY

Hino 

9 400 615 059 
220205620B 
INJECTION-PUMP ASSEMBLY
H07C-T
9 400 611 256 
220205650A 
INJECTION-PUMP ASSEMBLY
H07C-T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Hino 

9 400 611 327 
220205660A 
INJECTION-PUMP ASSEMBLY
H07C-T
9 400 613 102 
 
INJECTION-PUMP ASSEMBLY

Hino 

9 400 612 495 
220205680A 
INJECTION-PUMP ASSEMBLY
H07C-T
9 400 615 060 
220205750A 
INJECTION-PUMP ASSEMBLY
H07C-T
 
 
INJECTION-PUMP ASSEMBLY

Hino 

9 400 611 219 
220205740A 
INJECTION-PUMP ASSEMBLY
W06E
9 400 611 219 
S220205740 
INJECTION-PUMP ASSEMBLY
W06E
Back to top