106671-9131 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066719131


106671-9131 INJECTION-PUMP ASSEMBLY
Rating:
8
Buy INJECTION-PUMP ASSEMBLY 106671-9131 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106671-9131 1066719131

Cross reference number

ZEXEL 106671-9131 1066719131


Zexel num
Bosch num
Firm num
Name
106671-9131 
106671-9133 
 
  DPICO
INJECTION-PUMP ASSEMBLY
Q * Q

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4420
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.4 4.35 4.45
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   12.2
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   156.5 152.6 160.4
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   7.1+-0.5
Pump speed r/min   225 225 225
Each cylinder's injection qty mm3/st.   30 25.6 34.4
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(12.2)
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   156.5 155.5 157.5
Basic   *
Fixing the lever   *
Boost pressure kPa   89.3 89.3
Boost pressure mmHg   670 670
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1(12.2)
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   132 126 138
Fixing the lever   *
Boost pressure kPa   89.3 89.3
Boost pressure mmHg   670 670
Injection quantity adjustment_05
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   105 65 145
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   600 600 600
Rack position   R2(R1-2. 6)
Boost pressure kPa   3.3 3.3 6.6
Boost pressure mmHg   25 25 50
Boost compensator adjustment_02
Pump speed r/min   600 600 600
Rack position   R1(12.2)
Boost pressure kPa   76 76 76
Boost pressure mmHg   570 570 570
Timer adjustment
Pump speed r/min   -
Advance angle deg.   1.5 1 2
Load   0/4
Remarks
Measure speed (beginning of operation).
 
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   0 0 0
Load   4/4
Remarks
Measure the actual speed.
 
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   0.5
Load   4/4
Remarks
Measure the actual speed.
 
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   2.5 2 3
Load   4/4
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106671-9131
N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Tolerance for racks not indicated: +-0.05mm. (4)Boost compensator stroke: BCL (5)Damper spring setting
----------
RT=1 TH=2.1mm BCL=2.6+-0.1mm
----------

Speed control lever angle

Test data 106671-9131
F:Full speed
----------

----------
a=(18deg)+-5deg

0000000901

Test data 106671-9131
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=31deg+-5deg b=33.5deg+-3deg

Stop lever angle

Test data 106671-9131
S:Stop the pump. (1)Rack position = aa (2)Lever free and normal position (3)Stopper bolt setting
----------
aa=3.5-0.5mm
----------
a=38deg+-5deg b=38deg+7deg-5deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=325r/min Ra=6.8+-0.1mm
----------

Timing setting

Test data 106671-9131
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(6deg)




Have questions with 106671-9131?





Group cross 106671-9131 ZEXEL

Daewoo 

 
 
INJECTION-PUMP ASSEMBLY
D2366

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
D2366

Hyundai 

 
 
INJECTION-PUMP ASSEMBLY
Q

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
Q
F 019 Z20 073 
 
INJECTION-PUMP ASSEMBLY
Q

Hyundai 

9 400 617 040 
 
INJECTION-PUMP ASSEMBLY
Q
 
 
INJECTION-PUMP ASSEMBLY
Q

Dpico 

106671-9131  

106671-9133 
 
 
INJECTION-PUMP ASSEMBLY
Q
 
 
INJECTION-PUMP ASSEMBLY
Q
F 019 Z20 074 
 
INJECTION-PUMP ASSEMBLY
Q
9 400 619 455 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi-Heav 

9 400 617 041 
3626552110 
INJECTION-PUMP ASSEMBLY
S6B-TA
 
3626552120 
INJECTION-PUMP ASSEMBLY
S6B-TA
 
3626562120 
INJECTION-PUMP ASSEMBLY
S6B-TA
9 400 610 900 
3626572120 
INJECTION-PUMP ASSEMBLY
S6B-TA

Dpico 

F 019 Z20 075 
 
INJECTION-PUMP ASSEMBLY
DE12
 
 
INJECTION-PUMP ASSEMBLY
H100

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
H100
 
 
INJECTION-PUMP ASSEMBLY
H100
 
 
INJECTION-PUMP ASSEMBLY
H100
 
 
INJECTION-PUMP ASSEMBLY
H100
F 019 Z20 076 
 
INJECTION-PUMP ASSEMBLY
H100

Niigata-Urawa 

9 400 611 717 
75L47012A 
INJECTION-PUMP ASSEMBLY
DMF13HZ
Back to top