104746-1311 ZEXEL 9 460 610 708 BOSCH INJECTION-PUMP ASSEMBLY 9460610708 1047461311 8971032710

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104746-1311 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 610 708 9460610708

ZEXEL 104746-1311 1047461311

ISUZU 8971032710 8971032710

Components :

0.	INJECTION-PUMP ASSEMBLY	104746-1311
1.	_
2.	FUEL INJECTION PUMP	104646-1311
3.	NUMBER PLATE	146966-1100
4.	_	146672-1720
5.	CAPSULE
6.	ADJUSTING DEVICE	146679-0820
7.	NOZZLE AND HOLDER ASSY	105118-5951
8.	Nozzle and Holder	8-97103-274-0
9.	Open Pre:MPa(Kqf/cm2)	18.1{185}
10.	NOZZLE-HOLDER	105048-3220
11.	NOZZLE	105017-9010

Scheme ###:

1/6.	[1]	146601-0700	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0820	DRIVE SHAFT
12/1.	[1]	146200-0800	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-1720	ROLLER SET
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0100	SLOTTED WASHER
29.	[1]	146220-0720	CAM PLATE
30.	[1]	146600-0800	O-RING
31.	[1]	146300-2000	PUMP PLUNGER
32.	[1]	146301-0000	SLIDING PIECE
33.	[1]	146603-0700	SHIM
34.	[1]	146302-6000	COMPRESSION SPRING
34B.	[1]	146302-5900	COMPRESSION SPRING
34C.	[1]	146302-9000	COMPRESSION SPRING
35/1.	[0]	146603-0700	SHIM
35/1.	[0]	146603-0800	SHIM
35/1.	[0]	146603-0900	SHIM
35/1.	[0]	146603-1000	SHIM
35/1.	[0]	146603-1100	SHIM
35/1.	[0]	146603-3600	SHIM
36.	[1]	146600-0800	O-RING
37.	[1]	146310-1300	COVER
38.	[2]	146620-6300	BLEEDER SCREW
39.	[1]	146310-5100	COVER
40.	[2]	146620-5000	BLEEDER SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[2]	146603-0000	SHIM
48/1.	[2]	146603-0100	SHIM
48/1.	[2]	146603-0200	SHIM
48/1.	[2]	146603-0300	SHIM
48/1.	[2]	146603-0400	SHIM
48/1.	[2]	146603-0500	SHIM
48/1.	[2]	146603-0600	SHIM
48/1.	[2]	146690-1400	SHIM
48/1.	[2]	146690-1500	SHIM
48/1.	[2]	146690-1600	SHIM
48/1.	[2]	146690-1700	SHIM
48/1.	[2]	146690-1800	SHIM
48/1.	[2]	146690-1900	SHIM
48/1.	[2]	146690-5800	SHIM
48/1.	[2]	146690-5900	SHIM
48/1.	[2]	146690-6000	SHIM
48/1.	[2]	146690-6100	SHIM
48/1.	[2]	146690-6200	SHIM
48/1.	[2]	146690-6300	SHIM
48/1.	[2]	146690-6400	SHIM
48/1.	[2]	146690-6500	SHIM
48/1.	[2]	146690-6600	SHIM
48/1.	[2]	146690-6700	SHIM
48/1.	[2]	146690-6800	SHIM
48/1.	[2]	146690-6900	SHIM
48/1.	[2]	146690-7000	SHIM
48/1.	[2]	146690-7100	SHIM
48/1.	[2]	146690-7200	SHIM
48/1.	[2]	146690-7300	SHIM
48/1.	[2]	146690-7400	SHIM
48/1.	[2]	146690-7500	SHIM
48/1.	[2]	146690-7800	SHIM
49.	[2]	146234-0600	GUIDE PIN
50.	[1]	146402-3720	HYDRAULIC HEAD
50.	[1]	146402-3720	HYDRAULIC HEAD
50.	[1]	146402-3720	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM
52/1.	[1]	146420-0100	SHIM
52/1.	[1]	146420-0200	SHIM
52/1.	[1]	146420-0300	SHIM
52/1.	[1]	146420-0400	SHIM
52/1.	[1]	146420-0500	SHIM
52/1.	[1]	146420-0600	SHIM
52/1.	[1]	146420-0700	SHIM
52/1.	[1]	146420-0800	SHIM
52/1.	[1]	146420-0900	SHIM
52/1.	[1]	146420-1000	SHIM
52/1.	[1]	146420-1100	SHIM
52/1.	[1]	146420-1200	SHIM
52/1.	[1]	146420-1300	SHIM
52/1.	[1]	146420-1400	SHIM
52/1.	[1]	146420-1500	SHIM
52/1.	[1]	146420-1600	SHIM
52/1.	[1]	146420-1700	SHIM
52/1.	[1]	146420-1800	SHIM
52/1.	[1]	146420-1900	SHIM
52/1.	[1]	146420-2000	SHIM
52/1.	[1]	146420-2100	SHIM
52/1.	[1]	146420-2200	SHIM
52/1.	[1]	146420-2300	SHIM
52/1.	[1]	146420-2400	SHIM
52/1.	[1]	146420-2500	SHIM
52/1.	[1]	146420-2600	SHIM
52/1.	[1]	146420-2700	SHIM
52/1.	[1]	146420-2800	SHIM
52/1.	[1]	146420-2900	SHIM
52/1.	[1]	146420-3000	SHIM
52/1.	[1]	146420-3100	SHIM
52/1.	[1]	146420-3200	SHIM
52/1.	[1]	146420-3300	SHIM
52/1.	[1]	146420-3400	SHIM
52/1.	[1]	146420-3500	SHIM
52/1.	[1]	146420-3600	SHIM
52/1.	[1]	146420-3700	SHIM
52/1.	[1]	146420-3900	SHIM
52/1.	[1]	146420-4000	SHIM
52/1.	[1]	146420-4100	SHIM
52/1.	[1]	146420-4200	SHIM
52/1.	[1]	146420-4300	SHIM
52/1.	[1]	146420-4400	SHIM
52/1.	[1]	146420-4500	SHIM
52/1.	[1]	146420-4600	SHIM
52/1.	[1]	146420-4700	SHIM
52/1.	[1]	146420-4800	SHIM
52/1.	[1]	146420-4900	SHIM
52/1.	[1]	146420-5000	SHIM
52/1.	[1]	146420-5100	SHIM
52/1.	[1]	146420-5200	SHIM
52/1.	[1]	146420-5300	SHIM
52/1.	[1]	146420-5400	SHIM
52/1.	[1]	146420-5500	SHIM
52/1.	[1]	146420-5600	SHIM
52/1.	[1]	146420-5700	SHIM
52/1.	[1]	146420-5800	SHIM
54.	[4]	146433-0100	GASKET
55.	[4]	146430-1420	DELIVERY-VALVE ASSEMBLY
56.	[4]	146432-0200	COMPRESSION SPRING
58.	[4]	146440-1520	FITTING
60.	[4]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146752-8022	MANIFOLD-PRESSURE COMP.
67/1.	[1]	146805-3920	GOVERNOR COVER
67/4.	[1]	139310-0200	PLAIN WASHER
67/6.	[1]	014110-6440	LOCKING WASHER
67/8.	[1]	146515-8721	CONTROL SHAFT
67/9.	[1]	146587-4500	COILED SPRING
67/10.	[1]	146600-0200	O-RING
67/11.	[1]	146602-0100	PLAIN WASHER
67/12.	[1]	146540-4420	CONTROL LEVER
67/12B.	[1]	146540-4520	CONTROL LEVER
67/13.	[1]	013020-6040	UNION NUT
67/14.	[1]	146621-1700	UNION NUT
67/15.	[1]	146526-1800	BLEEDER SCREW
67/16.	[1]	146526-3000	BLEEDER SCREW
67/23.	[1]	146928-5500	BRACKET
67/24.	[2]	139006-4500	BLEEDER SCREW
67/25.	[1]	013020-6040	UNION NUT
67/26.	[1]	146932-0420	BRACKET
67/31.	[1]	146710-0800	BUSHING
67/32.	[1]	146711-0000	PLATE
67/33.	[1]	139218-0400	UNION NUT
67/34.	[1]	146712-0700	BEARING PIN
67/35.	[1]	146621-0300	UNION NUT
67/36.	[1]	146600-1400	O-RING
67/37.	[1]	146710-0100	BUSHING
67/38.	[1]	139506-0200	GASKET
67/39.	[1]	146620-0300	CAPSULE
67/40.	[1]	026512-1540	GASKET
67/41.	[1]	146713-4100	ADJUSTING PIN
67/42.	[2]	146714-0000	PLATE
67/43.	[1]	146715-0000	DIAPHRAGM
67/44.	[1]	139306-0100	LOCKING WASHER
67/45.	[1]	013030-6040	UNION NUT
67/46.	[1]	146716-0000	UNION NUT
67/47.	[1]	146717-0300	COILED SPRING
67/48/1.	[1]	146720-0000	SPACER BUSHING
67/48/1.	[1]	146720-0100	SPACER BUSHING
67/48/1.	[1]	146720-0200	SPACER BUSHING
67/48/1.	[1]	146720-0300	SPACER BUSHING
67/48/1.	[1]	146720-0400	SPACER BUSHING
67/48/1.	[1]	146720-0500	SPACER BUSHING
67/48/1.	[1]	146720-0600	SPACER BUSHING
67/48/1.	[1]	146720-0700	SPACER BUSHING
67/48/1.	[1]	146720-0800	SPACER BUSHING
67/48/1.	[1]	146720-0900	SPACER BUSHING
67/48/1.	[1]	146720-1000	SPACER BUSHING
67/48/1.	[1]	146720-1100	SPACER BUSHING
67/48/1.	[1]	146720-1200	SPACER BUSHING
67/48/1.	[1]	146720-1300	SPACER BUSHING
67/48/1.	[1]	146720-1400	SPACER BUSHING
67/48/1.	[1]	146720-1500	SPACER BUSHING
67/48/1.	[1]	146720-1600	SPACER BUSHING
67/48/1.	[1]	146720-1700	SPACER BUSHING
67/48/1.	[1]	146720-1800	SPACER BUSHING
67/48/1.	[1]	146720-1900	SPACER BUSHING
67/48/1.	[1]	146720-2000	SPACER BUSHING
67/48/1.	[1]	146720-2100	SPACER BUSHING
67/48/1.	[1]	146720-2200	SPACER BUSHING
67/48/1.	[1]	146720-2300	SPACER BUSHING
67/48/1.	[1]	146720-2400	SPACER BUSHING
67/48/1.	[1]	146720-2500	SPACER BUSHING
67/48/1.	[1]	146720-2600	SPACER BUSHING
67/48/1.	[1]	146720-2700	SPACER BUSHING
67/48/1.	[1]	146720-2800	SPACER BUSHING
67/48/1.	[1]	146720-2900	SPACER BUSHING
67/48/1.	[1]	146720-4500	SPACER BUSHING
67/48/1.	[1]	146720-4600	SPACER BUSHING
67/48/1.	[1]	146720-4700	SPACER BUSHING
67/48/1.	[1]	146720-4800	SPACER BUSHING
67/48/1.	[1]	146720-4900	SPACER BUSHING
67/48/1.	[1]	146720-5000	SPACER BUSHING
67/48/1.	[1]	146720-5100	SPACER BUSHING
67/48/1.	[1]	146720-5200	SPACER BUSHING
67/48/1.	[1]	146720-5300	SPACER BUSHING
67/48/1.	[1]	146725-2500	SPACER BUSHING
67/48/1.	[1]	146725-2600	SPACER BUSHING
67/48/1.	[1]	146725-2700	SPACER BUSHING
67/48/1.	[1]	146725-2800	SPACER BUSHING
67/48/1.	[1]	146725-2900	SPACER BUSHING
67/48/1.	[1]	146725-3000	SPACER BUSHING
67/48/1.	[1]	146725-3100	SPACER BUSHING
67/48/1.	[1]	146725-3200	SPACER BUSHING
67/48/1.	[1]	146725-3300	SPACER BUSHING
67/48/1.	[1]	146725-3400	SPACER BUSHING
67/48/1.	[1]	146725-3500	SPACER BUSHING
67/48/1.	[1]	146725-3600	SPACER BUSHING
67/48/1.	[1]	146725-3700	SPACER BUSHING
67/48/1.	[1]	146725-3800	SPACER BUSHING
67/48/1.	[1]	146725-3900	SPACER BUSHING
67/48/1.	[1]	146725-4000	SPACER BUSHING
67/48/1.	[1]	146725-4100	SPACER BUSHING
67/48/1.	[1]	146725-4200	SPACER BUSHING
67/48/1.	[1]	146725-4300	SPACER BUSHING
67/49.	[1]	146721-0820	COVER
67/54.	[2]	139006-4500	BLEEDER SCREW
67/55.	[2]	139006-4600	BLEEDER SCREW
67/56.	[1]	146723-0300	CONTROL LEVER
67/57.	[1]	146712-0100	BEARING PIN
67/58.	[2]	146620-0600	CAPSULE
67/59.	[2]	026506-1040	GASKET
67/60.	[1]	146724-0300	ELEMENT
67/61.	[1]	146724-0600	CAPSULE
67/64.	[1]	146928-5620	BRACKET
67/78.	[1]	146600-4400	SEAL RING
67/98.	[1]	139006-4500	BLEEDER SCREW
67/100.	[1]	146628-9000	BRACKET
67/112.	[1]	146931-8300	PLATE
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-3400	THREADED PIN
67/201B.	[1]	146545-3500	THREADED PIN
67/201C.	[1]	146545-3600	THREADED PIN
67/202.	[1]	139208-0900	UNION NUT
67/203.	[1]	146600-1200	O-RING
68.	[1]	146810-0920	CONTROL SHAFT
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146830-1700	CONTROL LEVER
72B.	[1]	146830-1800	CONTROL LEVER
73.	[1]	014110-6440	LOCKING WASHER
75.	[1]	146621-2500	UNION NUT
95.	[1]	146865-1920	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0300	UNION NUT
108.	[1]	146570-0100	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM
110/1.	[1]	146571-0100	SHIM
110/1.	[1]	146571-0200	SHIM
110/1.	[1]	146571-0300	SHIM
110/1.	[1]	146571-0400	SHIM
110/1.	[1]	146571-0500	SHIM
110/1.	[1]	146571-0600	SHIM
110/1.	[1]	146571-0700	SHIM
110/1.	[1]	146571-0800	SHIM
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER
115.	[1]	146575-2000	SLIDING SLEEVE
116.	[1]	146576-0200	CAP
117/1.	[1]	146577-1800	PLUG
117/1.	[1]	146577-1900	PLUG
117/1.	[1]	146577-2000	PLUG
117/1.	[1]	146577-2100	PLUG
117/1.	[1]	146577-2200	PLUG
117/1.	[1]	146577-2300	PLUG
117/1.	[1]	146577-2400	PLUG
117/1.	[1]	146577-2500	PLUG
117/1.	[1]	146577-2600	PLUG
117/1.	[1]	146577-2700	PLUG
117/1.	[1]	146577-2800	PLUG
117/1.	[1]	146577-2900	PLUG
117/1.	[1]	146577-3000	PLUG
117/1.	[1]	146577-3100	PLUG
117/1.	[1]	146577-3200	PLUG
117/1.	[1]	146577-3300	PLUG
117/1.	[1]	146577-6700	PLUG
117/1.	[1]	146577-6800	PLUG
117/1.	[1]	146577-6900	PLUG
117/1.	[1]	146577-7000	PLUG
117/1.	[1]	146577-7100	PLUG
117/1.	[1]	146577-7200	PLUG
117/1.	[1]	146577-7300	PLUG
117/1.	[1]	146577-7400	PLUG
117/1.	[1]	146577-7500	PLUG
117/1.	[1]	146577-7600	PLUG
117/1.	[1]	146577-7700	PLUG
117/1.	[1]	146577-7800	PLUG
117/1.	[1]	146577-7900	PLUG
117/1.	[1]	146577-8000	PLUG
117/1.	[1]	146577-8100	PLUG
117/1.	[1]	146877-0000	PLUG
117/1.	[1]	146877-0100	PLUG
117/1.	[1]	146877-0200	PLUG
117/1.	[1]	146877-0300	PLUG
117/1.	[1]	146877-4700	PLUG
117/1.	[1]	146877-4800	PLUG
117/1.	[1]	146877-4900	PLUG
117/1.	[1]	146877-5000	PLUG
123.	[4]	146620-0500	HEX-SOCKET-HEAD CAP SCREW
130.	[1]	146421-0320	CAPSULE
130/2.	[1]	026508-1140	GASKET
130/3.	[1]	146422-0300	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0620	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146650-9620	PULLING ELECTROMAGNET
137.	[2]	139514-0200	GASKET
145.	[1]	146621-1000	UNION NUT
147.	[1]	146600-5000	O-RING
160.	[1]	146625-8020	PLATE
205.	[1]	029470-4030	WOODRUFF KEY
217.	[1]	146541-2900	SLOTTED WASHER
218.	[1]	146592-4300	COILED SPRING
219.	[1]	146541-3000	BUSHING
220.	[1]	146592-4400	COILED SPRING
233.	[1]	146658-8920	WIRE
240.	[1]	146650-1220	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146658-7320	WIRE
243.	[1]	146621-1000	UNION NUT
245.	[3]	139512-0500	GASKET
245.	[3]	139512-0500	GASKET
246.	[1]	146125-0000	EYE BOLT
247.	[1]	146666-3920	INLET UNION
247.	[1]	146666-3920	INLET UNION
248.	[1]	146614-0200	SPACER BUSHING
310.	[1]	146683-0421	POTENTCIOMETER
310/1.	[1]	146684-5600	POTENTCIOMETER
310/3.	[2]	139104-0400	FLAT-HEAD SCREW
310/4.	[1]	146614-2300	JOINT CONNECTION
310/5.	[1]	146661-0401	BOOT
310/6.	[1]	146621-0500	UNION NUT
310/7.	[1]	146620-1500	FLAT-HEAD SCREW
800S.	[1]	146019-4320	PUMP HOUSING
800S/1/6.	[1]	146601-0700	PACKING RING
804S.	[1]	146232-0720	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
812S.	[1]	146600-1920	PARTS SET
813S.	[1]	146600-3120	PARTS SET
821S.	[1]	146210-5720	ROLLER SET
835S.	[1]	146598-1000	CAP
836S/1.	[1]	146598-0600	CAP
836S/1.	[1]	146598-0700	CAP
836S/1.	[1]	146598-0800	CAP
836S/1.	[1]	146598-0900	CAP
903.	[1]	146672-1720	PULSE GENERATOR
903/2.	[1]	146600-1300	O-RING
905.	[1]	146679-0820	ACTUATOR
906.	[1]	146966-1100	NAMEPLATE
912.	[2]	139006-6600	BLEEDER SCREW

Include in #2:

104746-1311 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 610 708 9460610708

ZEXEL 104746-1311 1047461311

ISUZU 8971032710 8971032710

Zexel num

Bosch num

Firm num

Name

104746-1311

9 460 610 708

8971032710 ISUZU

INJECTION-PUMP ASSEMBLY
4JB1-TC * K 11CJ VE4 VE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 900 900 900

Boost pressure kPa 34.7 33.4 36

Boost pressure kgf/cm2 0.35 0.336 0.364

Boost pressure mmHg 260 250 270

Average injection quantity mm3/st. 51 50.5 51.5

Difference in delivery mm3/st. 4.5

Basic *

Oil temperature degC 50 48 52

Remarks
CBS

Injection timing adjustment_02

Pump speed r/min 1250 1250 1250

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Average injection quantity mm3/st. 71.3 70.8 71.8

Difference in delivery mm3/st. 5.5

Basic *

Oil temperature degC 50 48 52

Remarks
Full

Injection timing adjustment_03

Pump speed r/min 500 500 500

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 34.3 28.8 39.8

Oil temperature degC 48 46 50

Injection timing adjustment_04

Pump speed r/min 900 900 900

Boost pressure kPa 34.7 33.4 36

Boost pressure kgf/cm2 0.35 0.336 0.364

Boost pressure mmHg 260 250 270

Average injection quantity mm3/st. 51 50 52

Difference in delivery mm3/st. 4.5

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_05

Pump speed r/min 1150 1150 1150

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Average injection quantity mm3/st. 70.2 66.7 73.7

Oil temperature degC 50 48 52

Injection timing adjustment_06

Pump speed r/min 1250 1250 1250

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Average injection quantity mm3/st. 71.3 70.3 72.3

Difference in delivery mm3/st. 5.5

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_07

Pump speed r/min 1250 1250 1250

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 49.7 46.7 52.7

Oil temperature degC 50 48 52

Injection timing adjustment_08

Pump speed r/min 1850 1850 1850

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Average injection quantity mm3/st. 82.3 77.8 86.8

Oil temperature degC 50 48 52

Injection quantity adjustment

Pump speed r/min 2300 2300 2300

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Average injection quantity mm3/st. 23.1 20.1 26.1

Difference in delivery mm3/st. 7

Basic *

Oil temperature degC 52 50 54

Injection quantity adjustment_02

Pump speed r/min 2700 2700 2700

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Average injection quantity mm3/st. 5

Oil temperature degC 55 52 58

Injection quantity adjustment_03

Pump speed r/min 2300 2300 2300

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Average injection quantity mm3/st. 30.2 27.2 33.2

Difference in delivery mm3/st. 7

Basic *

Oil temperature degC 52 50 54

Governor adjustment

Pump speed r/min 385 385 385

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 7.1 5.1 9.1

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 385 385 385

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 7.1 5.1 9.1

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Boost compensator adjustment

Pump speed r/min 750 750 750

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Average injection quantity mm3/st. 9.3 8.3 10.3

Oil temperature degC 50 48 52

Timer adjustment

Pump speed r/min 100 100 100

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 60 60 100

Oil temperature degC 48 46 50

Remarks
IDLE

Timer adjustment_02

Pump speed r/min 100 100 100

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 60 60 100

Oil temperature degC 48 46 50

Speed control lever angle

Pump speed r/min 385 385 385

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 1500 1500 1500

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 72 70.7 73.3

Overflow quantity with S/T ON cm3/min 680 550 810

Oil temperature degC 50 48 52

Stop lever angle

Pump speed r/min 1500 1500 1500

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Pressure with S/T OFF kPa 490 470 510

Pressure with S/T OFF kgf/cm2 5 4.8 5.2

Basic *

Oil temperature degC 50 48 52

Stop lever angle_02

Pump speed r/min 1500 1500 1500

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Pressure with S/T OFF kPa 490 470 510

Pressure with S/T OFF kgf/cm2 5 4.8 5.2

Basic *

Oil temperature degC 50 48 52

0000001101

Pump speed r/min 1500 1500 1500

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Timer stroke with S/T OFF mm 3.6 3.4 3.8

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 385 385 385

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Timer stroke with S/T ON mm 1.2

Oil temperature degC 48 46 50

_03

Pump speed r/min 750 750 750

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Timer stroke with S/T ON mm 1 1

Oil temperature degC 50 48 52

_04

Pump speed r/min 1250 1250 1250

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Timer stroke with S/T OFF mm 0.5 0.1 0.9

Oil temperature degC 50 48 52

_05

Pump speed r/min 1500 1500 1500

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Timer stroke with S/T OFF mm 3.6 3.4 3.8

Basic *

Oil temperature degC 50 48 52

_06

Pump speed r/min 2000 2000 2000

Boost pressure kPa 72 70.7 73.3

Boost pressure kgf/cm2 0.73 0.716 0.744

Boost pressure mmHg 540 530 550

Timer stroke with S/T OFF mm 7 6.7 7.4

Oil temperature degC 50 48 52

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

Timing setting

K dimension mm 3.1 3 3.2

KF dimension mm 5.5 5.4 5.6

MS dimension mm 0.7 0.6 0.8

Pre-stroke mm 0.45 0.43 0.47

Control lever angle alpha deg. 24 20 28

Control lever angle beta deg. 47 42 52

Test data Ex:

0000001801 STARTING I/Q ADJUSTMENT

Starting injection quantity adjustment Adjust the adjusting bolt A so that the starting injection quantity adjustment is within the standards. Fix using nut (B).
----------

----------
L=3.4~4.9mm T=3.4~4.9Nm(0.35~0.5kgm)

0000001901 POTENTIOMETER ADJUSTMENT

Adjusting method [applied voltage Vi, dummy bolt (C)] 1. Hold the dummy bolt (C) against the control lever at position N = N1, Q = Q1. Fix using the lock nut. 2. When adjusting the potentiometer, position the control lever against the dummy bolt (C) and adjust the potentiometer so that the output voltage is V1 (V). 3. Remove the dummy bolt (C) after the completion of adjustment. Confirm that the potentiometer output voltage is within the above mentioned standards between the control lever's adjusting point and the idling position. N:Pump speed V:Output voltage Q:Injection quantity P:Boost pressure A:Adjusting point B:Checking point Q2:Idle Q3:Full speed (C): Dummy bolt (D): Bracket for mounting the dummy bolt (E): Part numbers of the dummy bolt and the nut 146526-3300 (bolt) 42L 013020-6040 (nut)
----------
N1=750r/min V1=3.69+-0.03V Q1=9.3+-1cm3/1,000st
----------
N1=750r/min N2=385r/min V1=3.69+-0.03V V2=0.78+-0.45V V3=8.61+-0.45V Q1=9.3+-1cm3/1,000st Q2=7.1+-2.0 Idle cm3/1,000st Q3=Full speed P1=72.0kPa P2=540mmHg

0000002001 V-FICD ADJUSTMENT

Adjustment of the V-FICD 1. After completing potentiometer adjustment, install the vacuum type fast idle control device (V-FICD). 2. Confirm that the clearance between the control lever (B) and the actuator rod (A) is at least L1. 3. Insert the L2 shim between the control lever (B) and the idle set screw (C). 4. Adjust using the stroke adjusting screw (D) so that the actuator moves through its full stroke, then fix using the nut (E). 5. Apply the negative pressure of P1kPa {P2 mmHg} to the actuator and confirm that it moves through its full stroke. 6. After releasing negative pressure, re-confirm that the clearance between (A) and (B) is at least L3.
----------
L1=1mm L2=1.6+-0.1mm L3=1mm P1=-53.3kPa P2=-400mmHg
----------
L2=1.6+-0.1mm L3=1++mm