101608-1582 ZEXEL 9 400 611 754 BOSCH INJECTION-PUMP ASSEMBLY 9400611754 1016081582 me088945


101608-1582 INJECTION-PUMP ASSEMBLY
Rating:
54
Buy INJECTION-PUMP ASSEMBLY 101608-1582 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 754 9400611754
ZEXEL 101608-1582 1016081582
MITSUBISHI ME088945 me088945

Service parts 101608-1582 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101062-9020
3. GOVERNOR 105400-9090
4. SUPPLY PUMP 105220-5150
5. AUTOM. ADVANCE MECHANIS 105614-2061
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-5031
11. Nozzle and Holder ME016655
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105048-3590
14. NOZZLE 105017-1040
15. NOZZLE SET

Include in #1:

101608-1582 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 754 9400611754
ZEXEL 101608-1582 1016081582
MITSUBISHI ME088945 me088945


Zexel num
Bosch num
Firm num
Name
101608-1582 
9 400 611 754 
ME088945  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D34T K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.8
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   52.5 51.5 53.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   9.5 8.2 10.8
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   65 65 70
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1250++
Advance angle deg.   0 0 0
Remarks
Do not advance until starting N = 1250
 
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   3 3 3
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101608-1582
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)The torque control spring must does not have a set force. (5)Set idle sub-spring (6)Main spring setting (7)Rack difference between N = N1 and N = N2
----------
K=14 N1=1250r/min N2=700r/min
----------

Speed control lever angle

Test data 101608-1582
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(18deg)+-5deg b=(31deg)+-5deg

Stop lever angle

Test data 101608-1582
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101608-1582
(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12.5deg
----------
a=(2deg)




Have questions with 101608-1582?





Group cross 101608-1582 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 802 
ME078448 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY
9 400 619 761 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 803 
ME075942 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
9 400 619 556 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 508 
ME072750 
INJECTION-PUMP ASSEMBLY
6D16T2
9 400 610 759 
ME075401 
INJECTION-PUMP ASSEMBLY
6D17-2
9 400 615 804 
ME6H6067 
INJECTION-PUMP ASSEMBLY
6D14
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 805 
ME088946 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 610 760 
ME072805 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 806 
ME072830 
INJECTION-PUMP ASSEMBLY
6D16
F 019 Z10 236 
 
INJECTION-PUMP ASSEMBLY
9 400 610 761 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

101608-1582  
9 400 611 754 
ME088945 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 612 207 
ME078434 
INJECTION-PUMP ASSEMBLY
6D16
 
ME444577 
INJECTION-PUMP ASSEMBLY
6D16
Back to top