101608-1501 ZEXEL 9 400 615 802 BOSCH INJECTION-PUMP ASSEMBLY 9400615802 1016081501 me078448


101608-1501 INJECTION-PUMP ASSEMBLY
Rating:
33
Buy INJECTION-PUMP ASSEMBLY 101608-1501 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 802 9400615802
ZEXEL 101608-1501 1016081501
MITSUBISHI ME078448 me078448

Include in #1:

Cross reference number

BOSCH 9 400 615 802 9400615802
ZEXEL 101608-1501 1016081501
MITSUBISHI ME078448 me078448


Zexel num
Bosch num
Firm num
Name
101608-1501 
9 400 615 802 
ME078448  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D16T K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 255 255
Overflow valve opening pressure kgf/cm2   2.6 2.6 2.6
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.5 4.45 4.55
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.8
Pump speed r/min   1400 1400 1400
Average injection quantity mm3/st.   108.5 107.5 109.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8.3+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   10.5 9 12
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Timer adjustment
Pump speed r/min   1150--
Advance angle deg.   0 0 0
Load   4/4
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   450
Advance angle deg.   2 1.5 2.5
Load   0/4
Remarks
Start
 
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   0 0 0
Load   0/4
Remarks
Measure the actual speed.
 
Timer adjustment_04
Pump speed r/min   1100
Advance angle deg.   0.5
Load   4/4
Timer adjustment_05
Pump speed r/min   1400
Advance angle deg.   2.5 2 3
Load   4/4
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101608-1501
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Torque spring does not operate. (4)Main spring setting (5)Set idle sub-spring (6)At delivery
----------
K=13
----------

Speed control lever angle

Test data 101608-1501
F:Full speed I:Idle (1)Stopper bolt setting (2)At delivery (3)Set the pump speed at aa (4)Set the pump speed at bb.
----------
aa=1450r/min bb=1020r/min
----------
a=(30deg)+-5deg b=(1deg) c=(21deg)+-5deg d=(13deg)+-5deg

Stop lever angle

Test data 101608-1501
N:Pump normal S:Stop the pump.
----------

----------
a=26deg+-5deg b=53deg+-5deg

Timing setting

Test data 101608-1501
(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=10deg
----------
a=(1deg)




Have questions with 101608-1501?





Group cross 101608-1501 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

101608-1501  
9 400 615 802 
ME078448 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY
9 400 619 761 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 803 
ME075942 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
9 400 619 556 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 508 
ME072750 
INJECTION-PUMP ASSEMBLY
6D16T2
9 400 610 759 
ME075401 
INJECTION-PUMP ASSEMBLY
6D17-2
9 400 615 804 
ME6H6067 
INJECTION-PUMP ASSEMBLY
6D14
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 805 
ME088946 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 610 760 
ME072805 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 806 
ME072830 
INJECTION-PUMP ASSEMBLY
6D16
F 019 Z10 236 
 
INJECTION-PUMP ASSEMBLY
9 400 610 761 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 754 
ME088945 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 612 207 
ME078434 
INJECTION-PUMP ASSEMBLY
6D16
 
ME444577 
INJECTION-PUMP ASSEMBLY
6D16
Back to top