101608-1523 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016081523


101608-1523 INJECTION-PUMP ASSEMBLY
Rating:
40
Buy INJECTION-PUMP ASSEMBLY 101608-1523 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101608-1523 1016081523

Service parts 101608-1523 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101062-8180
3. GOVERNOR 105932-2063
4. SUPPLY PUMP 105210-6020
5. AUTOM. ADVANCE MECHANIS 105643-1170
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-7522
11. Nozzle and Holder ME072745
12. Open Pre:MPa(Kqf/cm2) 15.7{160}/21.6{220}
13. NOZZLE-HOLDER 105041-3031
14. NOZZLE
15. NOZZLE SET 105019-0690

Include in #1:

101608-1523 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101608-1523 1016081523


Zexel num
Bosch num
Firm num
Name
101608-1523 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8260
Bosch type code   9 430 610 133
Nozzle   105780-0120
Bosch type code   1 688 901 990
Nozzle holder   105780-2190
Opening pressure MPa   18
Opening pressure kgf/cm2   184
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-8420
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   12.4
Pump speed r/min   800 800 800
Each cylinder's injection qty mm3/st.   111 107.7 114.3
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   Z
Rack position   9.5+-0.5
Pump speed r/min   280 280 280
Each cylinder's injection qty mm3/st.   11.5 9.8 13.2
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(12.4)
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   111 110 112
Basic   *
Fixing the lever   *
Boost pressure kPa   35.3 35.3
Boost pressure mmHg   265 265
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1+0.8
Pump speed r/min   1350 1350 1350
Average injection quantity mm3/st.   114 110 118
Fixing the lever   *
Boost pressure kPa   35.3 35.3
Boost pressure mmHg   265 265
Injection quantity adjustment_05
Adjusting point   C
Rack position   R2[R1-0. 65]
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   105.5 101.5 109.5
Fixing the lever   *
Boost pressure kPa   35.3 35.3
Boost pressure mmHg   265 265
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   R2-0.7
Boost pressure kPa   8 6.7 9.3
Boost pressure mmHg   60 50 70
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   R2[R1-0. 65]
Boost pressure kPa   22 22 22
Boost pressure mmHg   165 165 165
Timer adjustment
Pump speed r/min   1200--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1150
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1350
Advance angle deg.   2 1.5 2.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101608-1523
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL
----------
T1=M47 BCL=0.7+-0.1mm
----------

Speed control lever angle

Test data 101608-1523
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=40mm
----------
a=18.5deg+-5deg b=40deg+-3deg

Stop lever angle

Test data 101608-1523
N:Pump normal S:Stop the pump. (1)Set the stopper bolt at speed = aa and rack position = bb and confirm non-injection. (2)After setting the stopper bolt, confirm non-injection at speed = cc and rack position = dd.
----------
aa=1350r/min bb=7-0.5mm cc=275r/min dd=(8.6)mm
----------
a=11.5deg+-5deg b=28deg+-5deg

0000001501 LEVER

Test data 101608-1523
(A) Idle (B) Full speed (C) Base lever (D) Accelerator lever (E) Accelerator lever delivery position 1. Measure speed lever angle (1)Measure the angle when the accelerator lever (D) contacted the base lever (C) at a.
----------

----------
b=40deg+-3deg c=18.5deg+-5deg

Timing setting

Test data 101608-1523
(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=10deg
----------
a=(2deg)




Have questions with 101608-1523?





Group cross 101608-1523 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
101608-1523  
 
 
INJECTION-PUMP ASSEMBLY
9 400 619 556 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 508 
ME072750 
INJECTION-PUMP ASSEMBLY
6D16T2
Back to top