101601-5190 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016015190 220005130a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101601-5190 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101601-5190 1016015190

HINO 220005130A 220005130a

Service parts 101601-5190 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-9931

3. GOVERNOR 105921-1730

4. SUPPLY PUMP 105220-5140

5. AUTOM. ADVANCE MECHANIS 105676-0290

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-4370

11. Nozzle and Holder 236001800A

12. Open Pre:MPa(Kqf/cm2) 19.6(200)

13. NOZZLE-HOLDER 105041-5080

14. NOZZLE 105015-5640

15. NOZZLE SET

Include in #1:

101601-5190 as INJECTION-PUMP ASSEMBLY

106682-4610 as _

106682-4611

Cross reference number

ZEXEL 101601-5190 1016015190

HINO 220005130A 220005130a

Zexel num

Bosch num

Firm num

Name

101601-5190
101601-5230

220005130A HINO

INJECTION-PUMP ASSEMBLY
W06E * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-5720

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.1 3.07 3.13

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.75 60.25

Difference between angles 2
Cyl.1-2 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cal 1-3 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-5 deg. 300 299.75 300.25

Injection quantity adjustment

Adjusting point -

Rack position 9.3

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 56.4 54.4 58.4

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point -

Rack position 8.6+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 9 7.5 10.5

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Injection quantity adjustment_03

Adjusting point A

Rack position R1(9.3)

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 56.4 55.4 57.4

Basic *

Fixing the lever *

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.1

Pump speed r/min 1500 1500 1500

Average injection quantity mm3/st. 64 60 68

Fixing the lever *

Injection quantity adjustment_05

Adjusting point C

Rack position R1-0.55

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 35.3 31.3 39.3

Fixing the lever *

Injection quantity adjustment_06

Adjusting point D

Rack position R1+0.3

Pump speed r/min 1200 1200 1200

Average injection quantity mm3/st. 70.2 66.2 74.2

Fixing the lever *

Injection quantity adjustment_07

Adjusting point E

Rack position R1(9.3)

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 30 26 34

Fixing the lever *

Injection quantity adjustment_08

Adjusting point I

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 94 94 104

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min 1200+50

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1500

Advance angle deg. 4 3.7 4.3

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT
----------
T1=B92
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=34deg+-3deg b=34deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Set the normal set bolt. (2)Engine normal (3)Engine stop
----------

----------
a=(12deg) b=(22deg)+-5deg c=35deg+-5deg d=40deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)