101601-5174 ZEXEL 9 400 614 602 BOSCH INJECTION-PUMP ASSEMBLY 9400614602 1016015174 220005191a


101601-5174 INJECTION-PUMP ASSEMBLY
Rating:
22
Buy INJECTION-PUMP ASSEMBLY 101601-5174 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 602 9400614602
ZEXEL 101601-5174 1016015174
HINO 220005191A 220005191a

Service parts 101601-5174 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-3360
3. GOVERNOR 105921-1595
4. SUPPLY PUMP 105210-4161
5. AUTOM. ADVANCE MECHANIS 105614-3390
6. COUPLING PLATE 105661-0410
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-7361
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 14.2(145)/19.6(200)
13. NOZZLE-HOLDER 105030-3482
14. NOZZLE
15. NOZZLE SET 105019-0161

Include in #1:

101601-5174 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 602 9400614602
ZEXEL 101601-5174 1016015174
HINO 220005191A 220005191a


Zexel num
Bosch num
Firm num
Name
101601-5174 
101601-5550 
9 400 614 602 
220005191A  HINO
INJECTION-PUMP ASSEMBLY
H07C * K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-0920
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.1 3.07 3.13
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.75 60.25
Difference between angles 2
Cyl.1-2
deg.   120 119.75 120.25
Difference between angles 3
Cal 1-6
deg.   180 179.75 180.25
Difference between angles 4
Cal 1-3
deg.   240 239.75 240.25
Difference between angles 5
Cal 1-5
deg.   300 299.75 300.25
Injection quantity adjustment
Adjusting point   -
Rack position   9.4
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   70 69 71
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   7+-0.1
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   8 7 9
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(9.4)
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   70 69 71
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   140 140 150
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1250--
Advance angle deg.   0 0 0
Load   3/4
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1200
Advance angle deg.   0.3
Load   3/4
Timer adjustment_03
Pump speed r/min   1450
Advance angle deg.   4 3.5 4.5
Load   4/4
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101601-5174
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT
----------
T1=B94
----------

Speed control lever angle

Test data 101601-5174
F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=33deg+-5deg b=(45deg)+-3deg

Stop lever angle

Test data 101601-5174
N:Engine normal (pump normal) S:Engine stop (1)Set the stopper screw. (After setting, apply red paint.)
----------

----------
a=0deg+-5deg b=(31deg)+-5deg

Timing setting

Test data 101601-5174
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101601-5174?





Group cross 101601-5174 ZEXEL

Hino 

 
220000652B 
INJECTION-PUMP ASSEMBLY
YF03
 
220005090A 
INJECTION-PUMP ASSEMBLY
YF03
 
 
INJECTION-PUMP ASSEMBLY
H07C
 
220005190A 
INJECTION-PUMP ASSEMBLY
H07C
101601-5174  

101601-5550 
9 400 614 602 
220005191A 
INJECTION-PUMP ASSEMBLY
H07C
Back to top