101608-6263 ZEXEL 9 400 615 847 BOSCH INJECTION-PUMP ASSEMBLY 9400615847 1016086263 me219122


101608-6263 INJECTION-PUMP ASSEMBLY
Rating:
16
Buy INJECTION-PUMP ASSEMBLY 101608-6263 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 847 9400615847
ZEXEL 101608-6263 1016086263
MITSUBISHI ME219122 me219122

Service parts 101608-6263 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101062-9251
3. GOVERNOR 105401-1231
4. SUPPLY PUMP 105220-5150
5. AUTOM. ADVANCE MECHANIS 105676-1200
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-6781
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 17.7(180)
13. NOZZLE-HOLDER 105048-3590
14. NOZZLE 105017-1040
15. NOZZLE SET

Include in #1:

101608-6263 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 615 847 9400615847
ZEXEL 101608-6263 1016086263
MITSUBISHI ME219122 me219122


Zexel num
Bosch num
Firm num
Name
101608-6263 
9 400 615 847 
ME219122  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D34TL K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.7
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   91 90 92
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Boost pressure kPa   64 64
Boost pressure mmHg   480 480
Injection quantity adjustment_02
Adjusting point   -
Rack position   6.1+-0.5
Pump speed r/min   525 525 525
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   E
Rack position   8.9++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   60 60 65
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   800 800 800
Rack position   R1-0.4
Boost pressure kPa   38.7 33.4 44
Boost pressure mmHg   290 250 330
Boost compensator adjustment_02
Pump speed r/min   800 800 800
Rack position   R1(8.7)
Boost pressure kPa   50.7 50.7 50.7
Boost pressure mmHg   380 380 380
Timer adjustment
Pump speed r/min   0
Advance angle deg.   2 1.5 2.5
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   2 1.5 2.5
Remarks
Measure speed (beginning of operation).
 
Timer adjustment_03
Pump speed r/min   750+-25
Advance angle deg.   0 0 0
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101608-6263
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)Boost compensator stroke: BCL (7)Rack difference between N = N1 and N = N2
----------
K=15 BCL=0.4+-0.1mm N1=1050r/min N2=230r/min
----------

Speed control lever angle

Test data 101608-6263
F:Full speed I:Idle S:Stop
----------

----------
a=(10deg)+-5deg b=35deg+-3deg c=(20deg)+-5deg

Stop lever angle

Test data 101608-6263
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Normal
----------
aa=0r/min bb=1-0.5mm
----------
a=21deg+-5deg b=(55deg)

0000001501 TAMPER PROOF

Test data 101608-6263
Tamperproofing-equipped boost compensator cover installation procedure (A) After adjusting the boost compensator, tighten the bolts to remove the heads. (1)Before adjusting the governor and the boost compensator, tighten the screw to the specified torque. (Tightening torque T = T1 maximum) (2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T2)
----------
T1=2.5N-m(0.25kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m)
----------

Timing setting

Test data 101608-6263
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14.5deg
----------
a=(130deg)




Have questions with 101608-6263?





Group cross 101608-6263 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
6D16TLEB
9 400 612 565 
 
INJECTION-PUMP ASSEMBLY
9 400 612 801 
 
INJECTION-PUMP ASSEMBLY
9 400 613 054 
 
INJECTION-PUMP ASSEMBLY
9 400 615 842 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 014 
ME078794 
INJECTION-PUMP ASSEMBLY
6D16TLEB
9 400 612 985 
 
INJECTION-PUMP ASSEMBLY
6D16TLEC
9 400 612 988 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
9 400 615 843 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 015 
ME078795 
INJECTION-PUMP ASSEMBLY
6D16TLEC
9 400 611 944 
 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 615 844 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 016 
ME078737 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY
9 400 611 203 
 
INJECTION-PUMP ASSEMBLY
6D34TE
9 400 612 752 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 055 
ME219075 
INJECTION-PUMP ASSEMBLY
6D34TE
 
 
INJECTION-PUMP ASSEMBLY
6D34TL

Mitsubishi 

9 400 615 845 
ME219120 
INJECTION-PUMP ASSEMBLY
6D34TL
 
 
INJECTION-PUMP ASSEMBLY
6D34TL

Mitsubishi 

9 400 615 846 
ME219121 
INJECTION-PUMP ASSEMBLY
6D34TL
9 400 611 713 
 
INJECTION-PUMP ASSEMBLY
6D34TL
9 400 612 949 
 
INJECTION-PUMP ASSEMBLY
9 400 613 258 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

101608-6263  
9 400 615 847 
ME219122 
INJECTION-PUMP ASSEMBLY
6D34TL
 
 
INJECTION-PUMP ASSEMBLY
6D16TL

Mitsubishi 

9 400 615 848 
ME078893 
INJECTION-PUMP ASSEMBLY
6D16TL
9 400 612 073 
 
INJECTION-PUMP ASSEMBLY
6D16TL
9 400 615 849 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 017 
ME078894 
INJECTION-PUMP ASSEMBLY
6D16TL
9 400 612 208 
 
INJECTION-PUMP ASSEMBLY
6D16TL
9 400 613 294 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 018 
ME440070 
INJECTION-PUMP ASSEMBLY
6D16TL
Back to top