101608-6290 ZEXEL 9 400 612 208 BOSCH INJECTION-PUMP ASSEMBLY 9400612208 1016086290


101608-6290 INJECTION-PUMP ASSEMBLY
Rating:
22
Buy INJECTION-PUMP ASSEMBLY 101608-6290 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 208 9400612208
ZEXEL 101608-6290 1016086290

Service parts 101608-6290 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-6730
3. GOVERNOR 105411-2260
4. SUPPLY PUMP 105210-5450
5. AUTOM. ADVANCE MECHANIS 105680-9000
6. COUPLING PLATE 105663-1150
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-5190
11. Nozzle and Holder ME440071
12. Open Pre:MPa(Kqf/cm2) 17.7{180}
13. NOZZLE-HOLDER 105030-3660
14. NOZZLE 105025-3250
15. NOZZLE SET

Include in #1:

101608-6290 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 612 208 9400612208
ZEXEL 101608-6290 1016086290


Zexel num
Bosch num
Firm num
Name
101608-6290 
101608-6291 
9 400 612 208 
   
INJECTION-PUMP ASSEMBLY
6D16TL * K 14BF PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.5 4.45 4.55
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.5
Pump speed r/min   1400 1400 1400
Average injection quantity mm3/st.   116 115 117
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Boost pressure kPa   54.7 54.7
Boost pressure mmHg   410 410
Injection quantity adjustment_02
Adjusting point   C
Rack position   8.1+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   8.5 7 10
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   E
Rack position   11.7++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   95 95 105
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   650 650 650
Rack position   9.5
Boost pressure kPa   15.3 8.6 22
Boost pressure mmHg   115 65 165
Boost compensator adjustment_02
Pump speed r/min   650 650 650
Rack position   10.7
Boost pressure kPa   45.3 42.6 48
Boost pressure mmHg   340 320 360
Timer adjustment
Pump speed r/min   1070--
Advance angle deg.   0 0 0
Load   4/4
Remarks
Beginning of advance.
 
Timer adjustment_02
Pump speed r/min   440
Advance angle deg.   3 2.5 3.5
Load   0/4
Remarks
Start
 
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   0 0 0
Load   0/4
Remarks
Measure the actual speed.
 
Timer adjustment_04
Pump speed r/min   1020
Advance angle deg.   0.5
Load   4/4
Timer adjustment_05
Pump speed r/min   1330
Advance angle deg.   3 2.5 3.5
Load   4/4
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101608-6290
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Boost compensator stroke: BCL (6)Main spring setting (7)Rack difference between N = N1 and N = N2
----------
K=11 BCL=1.2+-0.1mm N1=1400r/min N2=650r/min
----------

Speed control lever angle

Test data 101608-6290
F:Full speed I:Idle (1)Stopper bolt setting (2)Base lever only
----------

----------
a=(17deg)+-5deg b=(34deg)+-5deg

Stop lever angle

Test data 101608-6290
N:Pump normal S:Stop the pump. (1)Normal (2)Pump speed aa and rack position bb (to be sealed at delivery)
----------
aa=0r/min bb=1-0.5mm
----------
a=35deg+-5deg b=(55deg)

0000001501 TAMPER PROOF

Test data 101608-6290
Tamperproofing-equipped boost compensator cover installation procedure (A) After adjusting the boost compensator, tighten the bolts to remove the heads. (1)Before adjusting the governor and the boost compensator, tighten the screw to the specified torque. (Tightening torque T = T1 maximum) (2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T2)
----------
T1=2.5N-m(0.25kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m)
----------

Timing setting

Test data 101608-6290
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=6.5deg
----------
a=(3deg)




Have questions with 101608-6290?





Group cross 101608-6290 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
6D16TLEB
9 400 612 565 
 
INJECTION-PUMP ASSEMBLY
9 400 612 801 
 
INJECTION-PUMP ASSEMBLY
9 400 613 054 
 
INJECTION-PUMP ASSEMBLY
9 400 615 842 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 014 
ME078794 
INJECTION-PUMP ASSEMBLY
6D16TLEB
9 400 612 985 
 
INJECTION-PUMP ASSEMBLY
6D16TLEC
9 400 612 988 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
9 400 615 843 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 015 
ME078795 
INJECTION-PUMP ASSEMBLY
6D16TLEC
9 400 611 944 
 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 615 844 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 016 
ME078737 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY
9 400 611 203 
 
INJECTION-PUMP ASSEMBLY
6D34TE
9 400 612 752 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 055 
ME219075 
INJECTION-PUMP ASSEMBLY
6D34TE
 
 
INJECTION-PUMP ASSEMBLY
6D34TL

Mitsubishi 

9 400 615 845 
ME219120 
INJECTION-PUMP ASSEMBLY
6D34TL
 
 
INJECTION-PUMP ASSEMBLY
6D34TL

Mitsubishi 

9 400 615 846 
ME219121 
INJECTION-PUMP ASSEMBLY
6D34TL
9 400 611 713 
 
INJECTION-PUMP ASSEMBLY
6D34TL
9 400 612 949 
 
INJECTION-PUMP ASSEMBLY
9 400 613 258 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 847 
ME219122 
INJECTION-PUMP ASSEMBLY
6D34TL
 
 
INJECTION-PUMP ASSEMBLY
6D16TL

Mitsubishi 

9 400 615 848 
ME078893 
INJECTION-PUMP ASSEMBLY
6D16TL
9 400 612 073 
 
INJECTION-PUMP ASSEMBLY
6D16TL
9 400 615 849 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 017 
ME078894 
INJECTION-PUMP ASSEMBLY
6D16TL
101608-6290  

101608-6291 
9 400 612 208 
 
INJECTION-PUMP ASSEMBLY
6D16TL
9 400 613 294 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 018 
ME440070 
INJECTION-PUMP ASSEMBLY
6D16TL
Back to top