101607-9772 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016079772 16714z5602


101607-9772 INJECTION-PUMP ASSEMBLY
Rating:
62
Buy INJECTION-PUMP ASSEMBLY 101607-9772 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101607-9772 1016079772
NISSAN-DIESEL 16714Z5602 16714z5602

Cross reference number

ZEXEL 101607-9772 1016079772
NISSAN-DIESEL 16714Z5602 16714z5602


Zexel num
Bosch num
Firm num
Name
101607-9772 
 
16714Z5602  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FE6A * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-1520
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   12
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   71 69.4 72.6
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   10 8.2 11.8
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(12)
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   71 70 72
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1(12)
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   83 79 87
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   80 80 90
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1200--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1150
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1500
Advance angle deg.   6.5 6.2 6.8
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101607-9772
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=L66
----------

Speed control lever angle

Test data 101607-9772
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=100mm
----------
a=26.5deg+-5deg b=(46deg)+-3deg

Stop lever angle

Test data 101607-9772
N:Pump normal S:Stop the pump. (1)Use the pin at R = aa
----------
aa=42mm
----------
a=25deg+-5deg b=40deg+-5deg

0000001501 RACK SENSOR

Test data 101607-9772
R:Rack position (mm) V:Voltage (V) After installing the rack sensor, confirm the output value (VR).
----------
N1=800r/min Ra=R1(12)mm VR=2.5+-0.01V
----------

Timing setting

Test data 101607-9772
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101607-9772?





Group cross 101607-9772 ZEXEL

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16

Nissan-Diesel 

 
16713Z6515 
INJECTION-PUMP ASSEMBLY
FE6E
9 400 610 343 
1671395279 
INJECTION-PUMP ASSEMBLY
NE6TA

Daewoo 

9 400 611 778 
 
INJECTION-PUMP ASSEMBLY
DB58

Nissan-Diesel 

9 400 610 733 
1671395300 
INJECTION-PUMP ASSEMBLY
NE6TA

China 

9 400 615 760 
 
INJECTION-PUMP ASSEMBLY
6110

Nissan-Diesel 

9 400 610 734 
16713Z6517 
INJECTION-PUMP ASSEMBLY
FE6A
F 01G 09U 05T 
16713Z6966 
INJECTION-PUMP ASSEMBLY
FE6A
F 01G 09U 05U 
16714Z5601 
INJECTION-PUMP ASSEMBLY
FE6A
 
16713Z6518 
INJECTION-PUMP ASSEMBLY
FE6A
 
16713Z6809 
INJECTION-PUMP ASSEMBLY
FE6A
101607-9772  
 
16714Z5602 
INJECTION-PUMP ASSEMBLY
FE6A
9 400 610 735 
16713Z6560 
INJECTION-PUMP ASSEMBLY
MD92
9 400 615 761 
16714Z6015 
INJECTION-PUMP ASSEMBLY
MD92
9 400 610 736 
16713Z6561 
INJECTION-PUMP ASSEMBLY
MD92
9 400 615 762 
16714Z6016 
INJECTION-PUMP ASSEMBLY
MD92
Back to top