101607-9790 ZEXEL 9 400 610 736 BOSCH INJECTION-PUMP ASSEMBLY 9400610736 1016079790 16713z6561

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101607-9790 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 736 9400610736

ZEXEL 101607-9790 1016079790

NISSAN-DIESEL 16713Z6561 16713z6561

Service parts 101607-9790 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-6190

3. GOVERNOR 105932-1950

4. SUPPLY PUMP 105220-7150

5. AUTOM. ADVANCE MECHANIS 105672-5260

6. COUPLING PLATE 105662-1470

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-7290

11. Nozzle and Holder 16600-Z6004

12. Open Pre:MPa(Kqf/cm2) 16.7{170}/22.6{230}

13. NOZZLE-HOLDER 105048-4020

14. NOZZLE 105017-2160

15. NOZZLE SET

Include in #1:

101607-9790 as INJECTION-PUMP ASSEMBLY

Include in #2:

104746-5370 as _

Cross reference number

BOSCH 9 400 610 736 9400610736

ZEXEL 101607-9790 1016079790

NISSAN-DIESEL 16713Z6561 16713z6561

Zexel num

Bosch num

Firm num

Name

101607-9790
101607-9791

9 400 610 736

16713Z6561 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
MD92 * K 14BF PE6AD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8260

Bosch type code 9 430 610 133

Nozzle 105780-0120

Bosch type code 1 688 901 990

Nozzle holder 105780-2190

Opening pressure MPa 18

Opening pressure kgf/cm2 184

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-8921

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 255 255 255

Tester oil delivery pressure kgf/cm2 2.6 2.6 2.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.7 3.65 3.75

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point -

Rack position 11.8

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 95 93.4 96.6

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point Z

Rack position 9.5+-0.5

Pump speed r/min 280 280 280

Average injection quantity mm3/st. 12 11 13

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(11.8)

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 95 94 96

Basic *

Fixing the lever *

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.9

Pump speed r/min 1450 1450 1450

Average injection quantity mm3/st. 100.5 96.5 104.5

Fixing the lever *

Injection quantity adjustment_05

Adjusting point I

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 125 125 135

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min 970--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 920

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min (1000)

Advance angle deg. 1.5 1 2

Timer adjustment_04

Pump speed r/min 1160

Advance angle deg. 1.5 1 2

Timer adjustment_05

Pump speed r/min 1450

Advance angle deg. 7 6.5 7.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=L85
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=39mm
----------
a=6.5deg+-5deg b=35deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Use the hole at R = aa (2)No return spring
----------
aa=32mm
----------
a=10deg+-5deg b=40deg+-5deg

0000001501 LEVER

(a) Speed lever (B) Accelerator lever (C) Accelerator lever stopper bolt 1. Accelerator lever setting method With the speed lever in the idling position, back off the accelerator lever stopper bolt L1 from where it contacts point a.
----------
r1=39mm r2=38mm L1=1+0.5mm
----------