101607-9760 ZEXEL 9 400 610 734 BOSCH INJECTION-PUMP ASSEMBLY 9400610734 1016079760 16713z6517


101607-9760 INJECTION-PUMP ASSEMBLY
Rating:
57
Buy INJECTION-PUMP ASSEMBLY 101607-9760 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 734 9400610734
ZEXEL 101607-9760 1016079760
NISSAN-DIESEL 16713Z6517 16713z6517

Service parts 101607-9760 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-5340
3. GOVERNOR 105921-8620
4. SUPPLY PUMP 105220-7010
5. AUTOM. ADVANCE MECHANIS 105672-0380
6. COUPLING PLATE 105662-1370
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4113
11. Nozzle and Holder 16600-Z5665
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-4650
14. NOZZLE 105025-1020
15. NOZZLE SET

Include in #1:

101607-9760 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 734 9400610734
ZEXEL 101607-9760 1016079760
NISSAN-DIESEL 16713Z6517 16713z6517


Zexel num
Bosch num
Firm num
Name
101607-9760 
101607-9761 
9 400 610 734 
16713Z6517  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FE6A * K 14BF PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-1520
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   12
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   71 69.4 72.6
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   10 8.2 11.8
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(12)
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   71 70 72
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1(12)
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   83 79 87
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   80 80 90
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1200--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1150
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1500
Advance angle deg.   6.5 6.2 6.8
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101607-9760
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=L65
----------

Speed control lever angle

Test data 101607-9760
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=36mm
----------
a=25deg+-5deg b=37deg+-3deg

Stop lever angle

Test data 101607-9760
N:Pump normal S:Stop the pump. (1)No return spring
----------

----------
a=20deg+-5deg b=40deg+-5deg

0000001501 RACK SENSOR

Test data 101607-9760
(VR) measurement voltage (I) Part number of the control unit (G) Apply red paint. (H): End surface of the pump 1. Rack limit adjustment (1)Fix the rack at the rack limit position Ra. (2)Install the shim (D) to the rod (C) and tighten nut (E). (3)Select a shim (D) so that the distance between the end surface of the pump and the nut (E) is L. (4)Release the rack fixing and mount the joint (B) and fix. (5)At this time, confirm that the shim (D) does not interfere with the joint (B). 2. Rack sensor adjustment (-0420) (1)Screw in the bobbin (A) until it contacts the joint (B). (2)Fix the speed control lever at the full side. (3)Set the speed to N1 r/min. (4)Adjust the depth that the bobbin (A) is screwed in so that the control unit's rack sensor output voltage is VR+-0.01 (V), then tighten the nut (F). (5)Adjust the bobbin (A) so that the rack sensor's output voltage is VR. (6)Apply G at two places. Connecting part between the joint (B) and the nut (F) Connecting part between the joint (B) and the end surface of the pump (H)
----------
L=33-0.2 mm N1=800r/min Ra=R1(12)mm
----------

Timing setting

Test data 101607-9760
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101607-9760?





Group cross 101607-9760 ZEXEL

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16

Nissan-Diesel 

 
16713Z6515 
INJECTION-PUMP ASSEMBLY
FE6E
9 400 610 343 
1671395279 
INJECTION-PUMP ASSEMBLY
NE6TA

Daewoo 

9 400 611 778 
 
INJECTION-PUMP ASSEMBLY
DB58

Nissan-Diesel 

9 400 610 733 
1671395300 
INJECTION-PUMP ASSEMBLY
NE6TA

China 

9 400 615 760 
 
INJECTION-PUMP ASSEMBLY
6110

Nissan-Diesel 

101607-9760  

101607-9761 
9 400 610 734 
16713Z6517 
INJECTION-PUMP ASSEMBLY
FE6A
F 01G 09U 05T 
16713Z6966 
INJECTION-PUMP ASSEMBLY
FE6A
F 01G 09U 05U 
16714Z5601 
INJECTION-PUMP ASSEMBLY
FE6A
 
16713Z6518 
INJECTION-PUMP ASSEMBLY
FE6A
 
16713Z6809 
INJECTION-PUMP ASSEMBLY
FE6A
 
16714Z5602 
INJECTION-PUMP ASSEMBLY
FE6A
9 400 610 735 
16713Z6560 
INJECTION-PUMP ASSEMBLY
MD92
9 400 615 761 
16714Z6015 
INJECTION-PUMP ASSEMBLY
MD92
9 400 610 736 
16713Z6561 
INJECTION-PUMP ASSEMBLY
MD92
9 400 615 762 
16714Z6016 
INJECTION-PUMP ASSEMBLY
MD92
Back to top