101605-3621 ZEXEL 9 400 615 348 BOSCH INJECTION-PUMP ASSEMBLY 9400615348 1016053621 6138721240


101605-3621 INJECTION-PUMP ASSEMBLY
Rating:
47
Buy INJECTION-PUMP ASSEMBLY 101605-3621 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 348 9400615348
ZEXEL 101605-3621 1016053621
KOMATSU 6138721240 6138721240

Service parts 101605-3621 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-2740
3. GOVERNOR 105410-9301
4. SUPPLY PUMP 105210-4600
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105662-0870
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6180
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 24.5(250)
13. NOZZLE-HOLDER 105031-4480
14. NOZZLE 105015-5810
15. NOZZLE SET

Include in #1:

101605-3621 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 615 348 9400615348
ZEXEL 101605-3621 1016053621
KOMATSU 6138721240 6138721240


Zexel num
Bosch num
Firm num
Name
101605-3621 
9 400 615 348 
6138721240  KOMATSU
INJECTION-PUMP ASSEMBLY
S6D110 K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4 3.95 4.05
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.8
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   78.7 77.7 79.7
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   8+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   13.1 11.9 14.3
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101605-3621
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Rack difference between N = N1 and N = N2
----------
K=18 N1=1050r/min N2=700r/min
----------

Speed control lever angle

Test data 101605-3621
F:Full speed I:Idle S:Stop
----------

----------
a=16deg+-5deg b=26deg+-5deg c=32deg+-3deg

Stop lever angle

Test data 101605-3621
N:Pump normal S:Stop the pump.
----------

----------
a=10deg+-5deg b=53deg+-5deg

Timing setting

Test data 101605-3621
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(0deg)




Have questions with 101605-3621?





Group cross 101605-3621 ZEXEL

Komatsu 

9 400 615 346 
6137721260 
INJECTION-PUMP ASSEMBLY
S6D105
 
 
INJECTION-PUMP ASSEMBLY
SA6D91L
9 400 615 347 
6209711320 
INJECTION-PUMP ASSEMBLY
SA6D91L
 
 
INJECTION-PUMP ASSEMBLY
S6D110
101605-3621  
9 400 615 348 
6138721240 
INJECTION-PUMP ASSEMBLY
S6D110
 
6136721490 
INJECTION-PUMP ASSEMBLY
6D105
 
6136721480 
INJECTION-PUMP ASSEMBLY
6D105
 
6137721510 
INJECTION-PUMP ASSEMBLY
S6D105
 
 
INJECTION-PUMP ASSEMBLY
S6D110
9 400 615 349 
6138721410 
INJECTION-PUMP ASSEMBLY
S6D110
 
6137721460 
INJECTION-PUMP ASSEMBLY
S6D105
9 400 615 350 
6209711330 
INJECTION-PUMP ASSEMBLY
SA6D95L
 
 
INJECTION-PUMP ASSEMBLY
6D105
9 400 615 351 
6136721491 
INJECTION-PUMP ASSEMBLY
6D105
Back to top