101602-1402 ZEXEL 9 400 610 569 BOSCH INJECTION-PUMP ASSEMBLY 9400610569 1016021402 me078082


101602-1402 INJECTION-PUMP ASSEMBLY
Rating:
70
Buy INJECTION-PUMP ASSEMBLY 101602-1402 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 569 9400610569
ZEXEL 101602-1402 1016021402
MITSUBISHI ME078082 me078082

Service parts 101602-1402 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101061-8760
3. GOVERNOR 105412-2311
4. SUPPLY PUMP 105210-5450
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156637-7220
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4190
11. Nozzle and Holder ME078067
12. Open Pre:MPa(Kqf/cm2) 17.7{180}
13. NOZZLE-HOLDER 105030-3350
14. NOZZLE 105025-0370
15. NOZZLE SET

Include in #1:

101602-1402 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 610 569 9400610569
ZEXEL 101602-1402 1016021402
MITSUBISHI ME078082 me078082


Zexel num
Bosch num
Firm num
Name
101602-1402 
101608-1430 
9 400 610 569 
ME078082  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D16T K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.5 4.45 4.55
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.2
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   93.5 92.5 94.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   7.8+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   10.5 9 12
Max. variation between cylinders %   0 -15 15
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101602-1402
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Torque spring does not operate. (4)Set idle sub-spring (5)Main spring setting
----------
K=7
----------

Speed control lever angle

Test data 101602-1402
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(1deg)+-5deg b=(19deg)+-5deg

Stop lever angle

Test data 101602-1402
N:Pump normal S:Stop the pump.
----------

----------
a=26deg+-5deg b=53deg+-5deg

Timing setting

Test data 101602-1402
(1)Pump vertical direction (2)Position of coupling's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=11deg
----------
a=(1deg)




Have questions with 101602-1402?





Group cross 101602-1402 ZEXEL

F 01G 09U 037 
 
INJECTION-PUMP ASSEMBLY
F 01G 09U 038 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

101602-1402  

101608-1430 
9 400 610 569 
ME078082 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 614 737 
ME078327 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
9 400 613 115 
 
INJECTION-PUMP ASSEMBLY
6D34T

Mitsubishi 

9 400 614 738 
ME088910 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 614 739 
ME078381 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 614 740 
ME078382 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY
F 019 Z10 108 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 614 741 
ME078411 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 614 742 
ME078402 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 614 743 
ME078423 
INJECTION-PUMP ASSEMBLY
6D16
9 400 612 257 
ME078431 
INJECTION-PUMP ASSEMBLY
6D14T
Back to top