101602-1462 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016021462


101602-1462 INJECTION-PUMP ASSEMBLY
Rating:
81
Buy INJECTION-PUMP ASSEMBLY 101602-1462 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101602-1462 1016021462

Service parts 101602-1462 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101062-8040
3. GOVERNOR 105411-1780
4. SUPPLY PUMP 105210-5450
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156637-6920
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4460
11. Nozzle and Holder ME078365
12. Open Pre:MPa(Kqf/cm2) 17.7{180}
13. NOZZLE-HOLDER 105030-3350
14. NOZZLE 105025-0800
15. NOZZLE SET

Include in #1:

101602-1462 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

ZEXEL 101602-1462 1016021462


Zexel num
Bosch num
Firm num
Name
101602-1462 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.5 4.45 4.55
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.4
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   118.5 115 122
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   53.3 53.3
Boost pressure mmHg   400 400
Injection quantity adjustment_02
Adjusting point   -
Rack position   6.4+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   10.6 9.1 12.1
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Boost compensator adjustment
Pump speed r/min   650 650 650
Rack position   R1-0.75
Boost pressure kPa   28 25.3 30.7
Boost pressure mmHg   210 190 230
Boost compensator adjustment_02
Pump speed r/min   650 650 650
Rack position   R1(9.4)
Boost pressure kPa   40 33.3 46.7
Boost pressure mmHg   300 250 350

Test data Ex:

Governor adjustment

Test data 101602-1462
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL (4)Rack difference between N = N1 and N = N2 (5)Main spring setting (6)Set idle sub-spring
----------
K=15 BCL=0.75+-0.1mm N1=750r/min N2=230r/min
----------

Speed control lever angle

Test data 101602-1462
F:Full speed I:Idle (1)Stopper bolt setting (2)Pump speed = aa (3)Pump speed = bb
----------
aa=755r/min bb=910r/min
----------
a=(1deg)+-5deg b=(20deg)+-5deg c=(6deg)+-5deg

Stop lever angle

Test data 101602-1462
N:Pump normal S:Stop the pump. (1)Pump speed aa, rack position bb (2)(Seal at delivery.)
----------
aa=0r/min bb=1-0.5mm
----------
a=35deg+-5deg b=(55deg)

Timing setting

Test data 101602-1462
(1)Pump vertical direction (2)Position of coupling's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(0deg)




Have questions with 101602-1462?





Group cross 101602-1462 ZEXEL

F 01G 09U 037 
 
INJECTION-PUMP ASSEMBLY
F 01G 09U 038 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 569 
ME078082 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 614 737 
ME078327 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
9 400 613 115 
 
INJECTION-PUMP ASSEMBLY
6D34T

Mitsubishi 

9 400 614 738 
ME088910 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 614 739 
ME078381 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 614 740 
ME078382 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY
F 019 Z10 108 
 
INJECTION-PUMP ASSEMBLY
101602-1462  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 614 741 
ME078411 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 614 742 
ME078402 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 614 743 
ME078423 
INJECTION-PUMP ASSEMBLY
6D16
9 400 612 257 
ME078431 
INJECTION-PUMP ASSEMBLY
6D14T
Back to top