101602-1434 ZEXEL 9 400 614 738 BOSCH INJECTION-PUMP ASSEMBLY 9400614738 1016021434 me088910


101602-1434 INJECTION-PUMP ASSEMBLY
Rating:
76
Buy INJECTION-PUMP ASSEMBLY 101602-1434 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 738 9400614738
ZEXEL 101602-1434 1016021434
MITSUBISHI ME088910 me088910

Service parts 101602-1434 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101061-9900
3. GOVERNOR 105400-9041
4. SUPPLY PUMP 105210-5250
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156639-1020
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-5031
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 21.6(220)
13. NOZZLE-HOLDER 105048-3590
14. NOZZLE 105017-1040
15. NOZZLE SET

Include in #1:

101602-1434 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 614 738 9400614738
ZEXEL 101602-1434 1016021434
MITSUBISHI ME088910 me088910


Zexel num
Bosch num
Firm num
Name
101602-1434 
9 400 614 738 
ME088910  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D34T K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.8
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   71.5 70.5 72.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.4+-0.5
Pump speed r/min   450 450 450
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   D
Rack position   10++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   65 65 70
Fixing the lever   *
Rack limit   *

Test data Ex:

Governor adjustment

Test data 101602-1434
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting
----------
K=11
----------

Speed control lever angle

Test data 101602-1434
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=6deg+-5deg b=22deg+-5deg

Stop lever angle

Test data 101602-1434
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101602-1434
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12.5deg
----------
a=(130deg)




Have questions with 101602-1434?





Group cross 101602-1434 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
9 400 613 115 
 
INJECTION-PUMP ASSEMBLY
6D34T

Mitsubishi 

101602-1434  
9 400 614 738 
ME088910 
INJECTION-PUMP ASSEMBLY
6D34T
Back to top