106682-1020 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066821020 1156033040

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106682-1020 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106682-1020 1066821020

ISUZU 1156033040 1156033040

Cross reference number

ZEXEL 106682-1020 1066821020

ISUZU 1156033040 1156033040

Zexel num

Bosch num

Firm num

Name

106682-1020
106682-1021

1156033040 ISUZU

INJECTION-PUMP ASSEMBLY
6WG1-TMC * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8130

Bosch type code EFEP215A

Nozzle 105780-0050

Bosch type code DN6TD119NP1T

Nozzle holder 105780-2090

Bosch type code EFEP215

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-4-1000

Overflow valve 134424-4320

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 255 255 255

Tester oil delivery pressure kgf/cm2 2.6 2.6 2.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 2.8 2.75 2.85

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 12.9

Pump speed r/min 1050 1050 1050

Average injection quantity mm3/st. 535 530 540

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Boost pressure kPa 160 160

Boost pressure mmHg 1200 1200

Injection quantity adjustment_02

Adjusting point B

Rack position 4.8+-0.5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 10.5 7.3 13.7

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_03

Adjusting point E

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 250 250 290

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 800 800 800

Rack position 9.6

Boost pressure kPa 73.3 70.6 76

Boost pressure mmHg 550 530 570

Boost compensator adjustment_02

Pump speed r/min 800 800 800

Rack position (12.9)

Boost pressure kPa 147 147 147

Boost pressure mmHg 1100 1100 1100

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm. (2)Boost compensator stroke: BCL (3)Main spring setting (4)Set idle sub-spring
----------
BCL=(3.3)mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting (2)Use the hole at R = aa
----------
aa=135mm
----------
a=(5.5deg)+-5deg b=(15.5deg)+-5deg

0000000901

F:Full load (1)Fix using the stopper bolt.
----------

----------
a=15deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=27deg+-5deg b=71deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of coupling's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(30deg)