106675-4581 ZEXEL 9 400 611 393 BOSCH INJECTION-PUMP ASSEMBLY 9400611393 1066754581 6211721140

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106675-4581 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 393 9400611393

ZEXEL 106675-4581 1066754581

KOMATSU 6211721140 6211721140

Service parts 106675-4581 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-1890

3. GOVERNOR 105407-7720

4. SUPPLY PUMP 105237-5000

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105664-0340

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105111-4890

11. Nozzle and Holder 6211-12-3600

12. Open Pre:MPa(Kqf/cm2) 24.6{250}

13. NOZZLE-HOLDER 105041-7122

14. NOZZLE 105025-2290

15. NOZZLE SET

Include in #1:

106675-4581 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 393 9400611393

ZEXEL 106675-4581 1066754581

KOMATSU 6211721140 6211721140

Zexel num

Bosch num

Firm num

Name

106675-4581

9 400 611 393

6211721140 KOMATSU

INJECTION-PUMP ASSEMBLY
SA6D140 K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-3420

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.9 3.85 3.95

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 10.7

Pump speed r/min 950 950 950

Average injection quantity mm3/st. 150.5 148.5 152.5

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Boost pressure kPa 73.3 73.3

Boost pressure mmHg 550 550

Injection quantity adjustment_02

Adjusting point -

Rack position 7.3+-0.5

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 10 8.5 11.5

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Injection quantity adjustment_03

Adjusting point E

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 180 170 190

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Rack limit *

Boost compensator adjustment

Pump speed r/min 600 600 600

Rack position R1-1.95

Boost pressure kPa 28 25.3 30.7

Boost pressure mmHg 210 190 230

Boost compensator adjustment_02

Pump speed r/min 600 600 600

Rack position R1(11.45 )

Boost pressure kPa 60 53.3 66.7

Boost pressure mmHg 450 400 500

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL (5)Rack difference between N = N1 and N = N2
----------
K=11 BCL=1.95+-0.1mm N1=950r/min N2=625r/min
----------