106675-4560 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066754560


106675-4560 INJECTION-PUMP ASSEMBLY
Rating:
47
Buy INJECTION-PUMP ASSEMBLY 106675-4560 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106675-4560 1066754560

Service parts 106675-4560 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-0381
3. GOVERNOR 105407-7180
4. SUPPLY PUMP 105217-6030
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105664-0431
7. COUPLING PLATE 156637-2820
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105111-4540
11. Nozzle and Holder 6152-12-3100
12. Open Pre:MPa(Kqf/cm2) 27.5{280}
13. NOZZLE-HOLDER 105041-7130
14. NOZZLE 105025-0120
15. NOZZLE SET

Include in #1:

106675-4560 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106675-4560 1066754560


Zexel num
Bosch num
Firm num
Name
106675-4560 
 
   
INJECTION-PUMP ASSEMBLY
14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.8 3.75 3.85
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.4
Pump speed r/min   1015 1015 1015
Average injection quantity mm3/st.   172 170 174
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   64 64
Boost pressure mmHg   480 480
Injection quantity adjustment_02
Adjusting point   D
Rack position   5.7+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   13 11.5 14.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   F
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   170 160 180
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   600 600 600
Rack position   R1-1.45
Boost pressure kPa   14.7 12 17.4
Boost pressure mmHg   110 90 130
Boost compensator adjustment_02
Pump speed r/min   600 600 600
Rack position   R1(9.4)
Boost pressure kPa   50.7 44 57.4
Boost pressure mmHg   380 330 430

Test data Ex:

Governor adjustment

Test data 106675-4560
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke (5)Rack difference between N = N1 and N = N2
----------
K=8 N1=1015r/min N2=230r/min
----------

Speed control lever angle

Test data 106675-4560
F:Full speed I:Idle S:Stop (1)Use the hole at R = aa
----------
aa=85mm
----------
a=(1deg)+-5deg b=(22deg)+-5deg c=35deg+-3deg

Timing setting

Test data 106675-4560
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(150deg)




Have questions with 106675-4560?





Group cross 106675-4560 ZEXEL

Komatsu 

 
 
INJECTION-PUMP ASSEMBLY
SA6D125
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 611 223 
6152721250 
INJECTION-PUMP ASSEMBLY
SA6D125
9 400 612 630 
6152721251 
INJECTION-PUMP ASSEMBLY
SA6D125
 
6152721260 
INJECTION-PUMP ASSEMBLY
SA6D125
9 400 612 758 
6152721261 
INJECTION-PUMP ASSEMBLY
SA6D125

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
DE12TI
 
 
INJECTION-PUMP ASSEMBLY
S6D140

Komatsu 

9 400 617 402 
6211711690 
INJECTION-PUMP ASSEMBLY
S6D140
9 400 611 236 
 
INJECTION-PUMP ASSEMBLY
9 400 611 225 
 
INJECTION-PUMP ASSEMBLY
SA6D125

Komatsu 

9 400 617 403 
6152721442 
INJECTION-PUMP ASSEMBLY
SA6D125
 
 
INJECTION-PUMP ASSEMBLY
SA6D125
106675-4560  
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 611 224 
6152721270 
INJECTION-PUMP ASSEMBLY
SA6D125
9 400 617 404 
6152721271 
INJECTION-PUMP ASSEMBLY
SA6D125
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 405 
6211721160 
INJECTION-PUMP ASSEMBLY
SA6D140
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 611 393 
6211721140 
INJECTION-PUMP ASSEMBLY
SA6D140

Daewoo 

9 400 611 779 
 
INJECTION-PUMP ASSEMBLY
DE12TI
9 400 617 406 
 
INJECTION-PUMP ASSEMBLY
DE12TI
Back to top