106673-2070 ZEXEL F 01G 09U 08F BOSCH INJECTION-PUMP ASSEMBLY f01g09u08f 1066732070

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106673-2070 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 09U 08F f01g09u08f

ZEXEL 106673-2070 1066732070

Service parts 106673-2070 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106060-7980

3. GOVERNOR 105407-4160

4. SUPPLY PUMP 105207-1210

5. AUTOM. ADVANCE MECHANIS 105636-1700

6. COUPLING PLATE 105662-0710

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-6211

11. Nozzle and Holder ME059622

12. Open Pre:MPa(Kqf/cm2) 21.6(220)

13. NOZZLE-HOLDER 105030-5010

14. NOZZLE

105015-5330

15. NOZZLE SET

Include in #1:

106673-2070 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 01G 09U 08F f01g09u08f

ZEXEL 106673-2070 1066732070

Zexel num

Bosch num

Firm num

Name

106673-2070
106673-2071

F 01G 09U 08F

INJECTION-PUMP ASSEMBLY
* K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-4620

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.8 4.75 4.85

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 11.6

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 155.2 152.2 158.2

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 10.8

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 135 132 138

Fixing the rack *

Injection quantity adjustment_03

Adjusting point C

Rack position 6.4+-0.5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 10.8 8.2 13.4

Fixing the rack *

Remarks
(check)

Injection quantity adjustment_04

Adjusting point D

Rack position 5.7+-0.5

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 8.6 6 11.2

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Injection quantity adjustment_05

Adjusting point E

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 125 125 135

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min (900)

Advance angle deg. 0.5

Timer adjustment_02

Pump speed r/min -

Advance angle deg. 2 2 2

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)At delivery (5)Rack difference between N = N1 and N = N2 (6)Set idle sub-spring
----------
K=13 N1=750r/min N2=400r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting (2)At delivery (3)Pump speed = aa (4)Pump speed = bb
----------
aa=750r/min bb=900r/min
----------
a=27deg+-5deg b=(2deg) c=3deg+-5deg d=6deg+-5deg