106673-7540 ZEXEL 9 400 610 941 BOSCH INJECTION-PUMP ASSEMBLY 9400610941 1066737540 me158241


106673-7540 INJECTION-PUMP ASSEMBLY
Rating:
76
Buy INJECTION-PUMP ASSEMBLY 106673-7540 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 941 9400610941
ZEXEL 106673-7540 1066737540
MITSUBISHI ME158241 me158241

Service parts 106673-7540 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106060-7980
3. GOVERNOR 105407-6350
4. SUPPLY PUMP 105207-1210
5. AUTOM. ADVANCE MECHANIS 105636-1700
6. COUPLING PLATE 105662-0710
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-5990
11. Nozzle and Holder ME050883
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-3970
14. NOZZLE 105015-6150
15. NOZZLE SET

Include in #1:

106673-7540 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 941 9400610941
ZEXEL 106673-7540 1066737540
MITSUBISHI ME158241 me158241


Zexel num
Bosch num
Firm num
Name
106673-7540 
9 400 610 941 
ME158241  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D22TC K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.9
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   160.2 157.2 163.2
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   11.3
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   143.7 140.7 146.7
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   6.5+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   10.8 8.2 13.4
Fixing the rack   *
Remarks
(check)
 
Injection quantity adjustment_04
Adjusting point   D
Rack position   5.8+-0.5
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   9.8 7.2 12.4
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_05
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   125 125 135
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   (900)
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   2 2 2
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106673-7540
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set at delivery (5)Rack difference between N = N1 and N = N2 (6)Idle sub spring setting: L1.
----------
K=5 N1=750r/min N2=450r/min L1=5+-0.1mm
----------

Speed control lever angle

Test data 106673-7540
F:Full speed I:Idle (1)Stopper bolt setting (2)At delivery (3)Set the pump speed at aa (4)Set the pump speed at bb.
----------
aa=750r/min bb=900r/min
----------
a=(24deg)+-5deg b=(5deg) c=(2deg)+-5deg d=(6deg)+-5deg

Stop lever angle

Test data 106673-7540
N:Pump normal S:Stop the pump.
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 106673-7540
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(7deg)




Have questions with 106673-7540?





Group cross 106673-7540 ZEXEL

Mitsubishi 

9 400 610 938 
ME158269 
INJECTION-PUMP ASSEMBLY
6D24T
F 01G 09U 08X 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 346 
ME158246 
INJECTION-PUMP ASSEMBLY
6D22T
9 400 610 939 
ME158247 
INJECTION-PUMP ASSEMBLY
6D22T
9 400 610 940 
ME158248 
INJECTION-PUMP ASSEMBLY
6D22T
106673-7540  
9 400 610 941 
ME158241 
INJECTION-PUMP ASSEMBLY
6D22TC
9 400 610 942 
ME158242 
INJECTION-PUMP ASSEMBLY
6D22TC
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 347 
ME152205 
INJECTION-PUMP ASSEMBLY
6D22T2
9 400 617 348 
ME158264 
INJECTION-PUMP ASSEMBLY
6D22T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 943 
ME152300 
INJECTION-PUMP ASSEMBLY
6D24T1
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 944 
ME152301 
INJECTION-PUMP ASSEMBLY
6D24T1
Back to top