106673-2060 ZEXEL 9 400 617 206 BOSCH INJECTION-PUMP ASSEMBLY 9400617206 1066732060 me157064


106673-2060 INJECTION-PUMP ASSEMBLY
Rating:
15
Buy INJECTION-PUMP ASSEMBLY 106673-2060 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 206 9400617206
ZEXEL 106673-2060 1066732060
MITSUBISHI ME157064 me157064

Service parts 106673-2060 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106060-7980
3. GOVERNOR 105407-4180
4. SUPPLY PUMP 105207-1210
5. AUTOM. ADVANCE MECHANIS 105636-1700
6. COUPLING PLATE 105662-0710
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6211
11. Nozzle and Holder ME059621
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105030-5010
14. NOZZLE 105015-5330
15. NOZZLE SET

Include in #1:

106673-2060 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 206 9400617206
ZEXEL 106673-2060 1066732060
MITSUBISHI ME157064 me157064


Zexel num
Bosch num
Firm num
Name
106673-2060 
106673-7530 
9 400 617 206 
ME157064  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D22T * K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.6
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   155.2 152.2 158.2
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   10.8
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   135 132 138
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   6.4+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   10.8 8.2 13.4
Fixing the rack   *
Remarks
(check)
 
Injection quantity adjustment_04
Adjusting point   D
Rack position   5.7+-0.5
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   8.6 6 11.2
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_05
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   125 125 135
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   (900)
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   2 2 2
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106673-2060
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)At delivery (5)Rack difference between N = N1 and N = N2 (6)Set idle sub-spring
----------
K=13 N1=750r/min N2=450r/min
----------

Speed control lever angle

Test data 106673-2060
F:Full speed I:Idle (1)Stopper bolt setting (2)At delivery (3)Pump speed = aa (4)Pump speed = bb
----------
aa=750r/min bb=900r/min
----------
a=27deg+-5deg b=(2deg) c=3deg+-5deg d=6deg+-5deg

Stop lever angle

Test data 106673-2060
N:Pump normal S:Stop the pump. (1)Normal stop
----------

----------
a=39deg+-5deg b=53deg+-5deg

Timing setting

Test data 106673-2060
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(7deg)




Have questions with 106673-2060?





Group cross 106673-2060 ZEXEL

Mitsubishi 

9 400 617 200 
ME056793 
INJECTION-PUMP ASSEMBLY
6D22T2
9 400 617 201 
ME056792 
INJECTION-PUMP ASSEMBLY
6D22
9 400 617 202 
ME157073 
INJECTION-PUMP ASSEMBLY
6D22T
9 400 617 203 
ME056797 
INJECTION-PUMP ASSEMBLY
6D22T3
9 400 617 204 
ME157072 
INJECTION-PUMP ASSEMBLY
6D22T
9 400 617 205 
ME157063 
INJECTION-PUMP ASSEMBLY
6D22T
106673-2060  

106673-7530 
9 400 617 206 
ME157064 
INJECTION-PUMP ASSEMBLY
6D22T
F 01G 09U 08F 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 207 
ME157065 
INJECTION-PUMP ASSEMBLY
6D22T
9 400 617 208 
ME157066 
INJECTION-PUMP ASSEMBLY
6D22TC
9 400 617 209 
ME157067 
INJECTION-PUMP ASSEMBLY
6D22TC
Back to top