106672-3850 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066723850

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106672-3850 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106672-3850 1066723850

Service parts 106672-3850 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-1850

3. GOVERNOR 105407-5171

4. SUPPLY PUMP 105217-1301

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105662-0850

7. COUPLING PLATE 156637-3720

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-5851

11. Nozzle and Holder 23600-2030A

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105031-5480

14. NOZZLE 105015-7690

15. NOZZLE SET

Include in #1:

106672-3850 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106672-3850 1066723850

Zexel num

Bosch num

Firm num

Name

106672-3850

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-0920

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.3 3.2 3.3

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 10.2

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 164 162 166

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point D

Rack position 6+-0.5

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 10.5 7.5 13.5

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Injection quantity adjustment_03

Adjusting point E

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 225 215 235

Fixing the lever *

Rack limit *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring
----------
K=8
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting (2)Stopper bolt setting (3)When pump speed set at aa (4)Set the pump speed at bb.
----------
aa=750r/min bb=900r/min
----------
a=4deg+-5deg b=18deg+-5deg c=4deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Contacts inner stopper. (2)Rack position aa or less, pump speed bb (3)Contacts outer stopper.
----------
aa=5.5mm bb=0r/min
----------
a=27deg+-5deg b=53deg+-5deg c=(11deg)