106672-3640 ZEXEL 9 400 617 106 BOSCH INJECTION-PUMP ASSEMBLY 9400617106 1066723640 220204170a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106672-3640 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 106 9400617106

ZEXEL 106672-3640 1066723640

HINO 220204170A 220204170a

Service parts 106672-3640 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106061-7000

3. GOVERNOR 105407-5160

4. SUPPLY PUMP 105217-1301

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105662-0910

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-5273

11. Nozzle and Holder 23600-1561C

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105031-4451

14. NOZZLE 105015-4920

15. NOZZLE SET

Include in #1:

106672-3640 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 106 9400617106

ZEXEL 106672-3640 1066723640

HINO 220204170A 220204170a

Zexel num

Bosch num

Firm num

Name

106672-3640

9 400 617 106

220204170A HINO

INJECTION-PUMP ASSEMBLY
M10C-T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-1420

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.9 3.85 3.95

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 7.8

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 89.3 88.3 90.3

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 6.2+-0.5

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 14 11 17

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Injection quantity adjustment_03

Adjusting point C

Rack position 11+-0.1

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 187 177 197

Fixing the lever *

Rack limit *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)Set idle sub-spring (4)Main spring setting (5)Rack difference between N = N1 and N = N2
----------
K=9 RAL=11+-0.1mm N1=850r/min N2=600r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Set the pump speed at aa. ( At delivery ) (2)Set the pump speed at bb. (3)Stopper bolt setting
----------
aa=900r/min bb=750r/min
----------
a=(3deg)+-5deg b=(20deg)+-5deg c=(5deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Contacts inner stopper. (2)Rack position = aa or less, at speed = bb (3)Contacts outer stopper.
----------
aa=5.7mm bb=0r/min
----------
a=27deg+-5deg b=53deg+-5deg c=(11deg)