Fuel injectors
  1. Home
  2. injection
  3. #1066719070

106671-9070 ZEXEL 9 400 617 037 BOSCH INJECTION-PUMP ASSEMBLY 9400617037 1066719070 3310083c41


106671-9070 INJECTION-PUMP ASSEMBLY
Rating:
17
Buy INJECTION-PUMP ASSEMBLY 106671-9070 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 037 9400617037
ZEXEL 106671-9070 1066719070
HYUNDAI 3310083C41 3310083c41

Service parts 106671-9070 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106060-5140
3. GOVERNOR 105408-0720
4. SUPPLY PUMP 105207-1210
5. AUTOM. ADVANCE MECHANIS 105636-1820
6. COUPLING PLATE 105662-0710
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6211
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105030-5010
14. NOZZLE 105015-5330
15. NOZZLE SET

Include in #1:

106671-9070 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 037 9400617037
ZEXEL 106671-9070 1066719070
HYUNDAI 3310083C41 3310083c41


Zexel num
Bosch num
Firm num
Name
106671-9070 
9 400 617 037 
3310083C41  HYUNDAI
INJECTION-PUMP ASSEMBLY
6D22T * K 14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.7
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   127.5 124.5 130.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   5.7+-0.5
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   15 12.4 17.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.  
Injection quantity adjustment_03
Adjusting point   C
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   133 113 153
Fixing the lever   *
Rack limit   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   6+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   11 8.4 13.6
Fixing the rack   *
Remarks
(check)  
Timer adjustment
Pump speed r/min   (N1+50)- -
Advance angle deg.   0 0 0
Remarks
Start  
Timer adjustment_02
Pump speed r/min   N1
Advance angle deg.   0.5
Remarks
Measure the actual speed.  
Timer adjustment_03
Pump speed r/min   1050
Remarks
Measure the actual advance angle.  
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   1 1 1
Remarks
Measure the actual speed, stop  

Test data Ex:

Governor adjustment

Test data 106671-9070
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Torque spring does not operate. (4)RACK LIMIT (5)Rack difference between N = N1 and N = N2
----------
K=7 N1=1000r/min N2=600r/min
----------

Speed control lever angle

Test data 106671-9070
F:Full speed I:Idle S:Stop
----------

----------
a=(7deg)+-5deg b=(30deg)+-5deg c=35deg+-3deg

Stop lever angle

Test data 106671-9070
N:Pump normal S:Stop the pump.
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 106671-9070
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(7deg)




Have questions with 106671-9070?





Group cross 106671-9070 ZEXEL

106671-9000  
9 400 619 693 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi-Heav 

106671-9010  
9 400 617 033 
3266560060 
INJECTION-PUMP ASSEMBLY
S12A2

Komatsu 

106671-9020  

106671-9021 
 
6152711410 
INJECTION-PUMP ASSEMBLY
SA6D125
106671-9021  

106671-9022 
 
6152711411 
INJECTION-PUMP ASSEMBLY
SA6D125
106671-9022  
9 400 617 034 
6152711412 
INJECTION-PUMP ASSEMBLY
SA6D125

Daewoo 

106671-9030  
9 400 617 035 
 
INJECTION-PUMP ASSEMBLY
D2366TI

Dpico 

106671-9040  

106671-9041 
 
 
INJECTION-PUMP ASSEMBLY
D2366
106671-9041  
 
 
INJECTION-PUMP ASSEMBLY
D2366
106671-9050  
F 019 Z20 072 
 
INJECTION-PUMP ASSEMBLY
D2366TI

Hyundai 

106671-9060  
9 400 617 036 
3310083C42 
INJECTION-PUMP ASSEMBLY
6D22T
106671-9070  
9 400 617 037 
3310083C41 
INJECTION-PUMP ASSEMBLY
6D22T

Daewoo 

106671-9080  

106671-9081 
 
 
INJECTION-PUMP ASSEMBLY
D2366
106671-9081  
9 400 617 038 
 
INJECTION-PUMP ASSEMBLY
D2366

Hyundai 

106671-9090  
9 400 617 039 
 
INJECTION-PUMP ASSEMBLY
6D22T
Back to top