106661-5490 ZEXEL 9 400 612 174 BOSCH INJECTION-PUMP ASSEMBLY 9400612174 1066615490 1671396814


106661-5490 INJECTION-PUMP ASSEMBLY
Rating:
56
Buy INJECTION-PUMP ASSEMBLY 106661-5490 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 174 9400612174
ZEXEL 106661-5490 1066615490
NISSAN-DIESEL 1671396814 1671396814

Service parts 106661-5490 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106066-5350
3. GOVERNOR 105487-4110
4. SUPPLY PUMP 105227-6010
5. AUTOM. ADVANCE MECHANIS 105636-2020
6. COUPLING PLATE 105662-1180
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4570
11. Nozzle and Holder 16600-96502
12. Open Pre:MPa(Kqf/cm2) 22.6{230}
13. NOZZLE-HOLDER 105031-4370
14. NOZZLE 105015-4170
15. NOZZLE SET

Include in #1:

106661-5490 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 612 174 9400612174
ZEXEL 106661-5490 1066615490
NISSAN-DIESEL 1671396814 1671396814


Zexel num
Bosch num
Firm num
Name
106661-5490 
9 400 612 174 
1671396814  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
PE6HT03 * K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   B
Rack position   10.8
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   148.5 146.5 150.5
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   3.6+-0.5
Pump speed r/min   345 345 345
Average injection quantity mm3/st.   12 11 13
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   975--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   925
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1100
Advance angle deg.   0.75 0.25 1.25
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   1.2 1.2 1.2
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106661-5490
N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm. (2)Rack limit using the stop lever: R1 (3)Damper spring setting
----------
R1=11.5+-0.1mm
----------

Speed control lever angle

Test data 106661-5490
F:Full speed
----------

----------
a=6deg+-5deg

0000000901

Test data 106661-5490
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=33deg+-5deg b=33deg+-3deg

Stop lever angle

Test data 106661-5490
N:Pump normal S:Stop the pump. (1)Drive side (2)Rack position = aa (3)Use the hole at R = bb
----------
aa=11.5+-0.1mm bb=32mm
----------
a=29.5deg+-5deg b=4deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Test data 106661-5490
Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Maximum no-load speed (r/min) LABEL9:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)At high idle rack position L
----------
L=4mm
----------
a1=E a2=B a3=C a4=- a5=- a6=- r1=750r/min r2=750r/min r3=750r/min r4=- r5=- r6=- Q1=165.5+-2mm3/st Q2=148.5+-2mm3/st Q3=142+-2mm3/st Q4=- Q5=- Q6=- c1=+-4% c2=+-4% c3=+-4% c4=- c5=- c6=- a7=E-22 a8=E-21 a9=E-20 a10=E-19 a11=E-18 a12=B-22 a13=B-21 a14=B-20 a15=B-19 a16=B-18 a17=C-22 a18=C-21 a19=C-20 a20=C-19 a21=C-18 a22=C-17 a23=- a24=- a25=- a26=- a27=- a28=- r7=1100r/min r8=1050r/min r9=1000r/min r10=950r/min r11=900r/min r12=1100r/min r13=1050r/min r14=1000r/min r15=950r/min r16=900r/min r17=1100r/min r18=1050r/min r19=1000r/min r20=950r/min r21=900r/min r22=850r/min r23=- r24=- r25=- r26=- r27=- r28=- R7=1180+-27r/min R8=1130+-26r/min R9=1075+-25r/min R10=1020+-23r/min R11=965+-22r/min R12=1180+-27r/min R13=1130+-26r/min R14=1075+-25r/min R15=1020+-23r/min R16=965+-22r/min R17=1180+-27r/min R18=1130+-26r/min R19=1075+-25r/min R20=1020+-23r/min R21=965+-22r/min R22=915+-22r/min R23=- R24=- R25=- R26=- R27=- R28=-

Timing setting

Test data 106661-5490
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(30deg)




Have questions with 106661-5490?





Group cross 106661-5490 ZEXEL

Nissan-Diesel 

9 400 616 621 
1671396072 
INJECTION-PUMP ASSEMBLY
PD6T
F 019 Z20 399 
1679096016 
INJECTION-PUMP ASSEMBLY
PD6T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 616 622 
1671396806 
INJECTION-PUMP ASSEMBLY
PE6
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 616 623 
1671396805 
INJECTION-PUMP ASSEMBLY
PE6H
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 616 624 
1671396807 
INJECTION-PUMP ASSEMBLY
PE6HT03
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 616 625 
1671396808 
INJECTION-PUMP ASSEMBLY
PE6HT03
 
1679096515 
INJECTION-PUMP ASSEMBLY
PE6T04
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 616 626 
1670096666 
INJECTION-PUMP ASSEMBLY
PE6T
9 400 616 627 
1671396813 
INJECTION-PUMP ASSEMBLY
PE6HT03
106661-5490  
9 400 612 174 
1671396814 
INJECTION-PUMP ASSEMBLY
PE6HT03
Back to top