106661-5420 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066615420


106661-5420 INJECTION-PUMP ASSEMBLY
Rating:
40
Buy INJECTION-PUMP ASSEMBLY 106661-5420 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106661-5420 1066615420

Service parts 106661-5420 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106066-5260
3. GOVERNOR 105487-4060
4. SUPPLY PUMP 105217-6010
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105662-0751
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5950
11. Nozzle and Holder 16600-96510
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-4370
14. NOZZLE 105015-5580
15. NOZZLE SET

Include in #1:

106661-5420 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106661-5420 1066615420


Zexel num
Bosch num
Firm num
Name
106661-5420 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.65 3.6 3.7
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   12.2
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   122.3 120.3 124.3
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7+-0.5
Pump speed r/min   240 240 240
Average injection quantity mm3/st.   10 8.7 11.3
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Timer adjustment
Pump speed r/min   950--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1150
Advance angle deg.   5 4.5 5.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106661-5420
N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Rack limit using the stop lever: R1 (4)Excess fuel setting for starting: SXL (5)Damper spring setting: DL (6)Variable speed specification: idling adjustment (7)Fix the lever at the full-load position at delivery. (8)Main spring setting
----------
RT=1 TH=1.8mm R1=14+-0.1mm SXL=12.2+0.2mm DL=5.5-0.5mm
----------

Speed control lever angle

Test data 106661-5420
F:Full speed I:Idle (1)Set the speed at aa, set the stopper bolt (2)Set the pump speed at bb. (3)Set the stopper bolt (fixed at full-load position at delivery.)
----------
aa=275r/min bb=1150r/min
----------
a=31deg+-5deg b=23deg+-5deg

0000000901

Test data 106661-5420
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=15deg+-5deg b=40.5deg+-3deg

Stop lever angle

Test data 106661-5420
N:Pump normal S:Stop the pump. (1)R = aa (2)Rack position bb
----------
aa=50mm bb=14+-0.1mm
----------
a=34.5deg+-5deg b=36.5deg+-3deg

Timing setting

Test data 106661-5420
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(30deg)




Have questions with 106661-5420?





Group cross 106661-5420 ZEXEL

Nissan-Diesel 

9 400 616 621 
1671396072 
INJECTION-PUMP ASSEMBLY
PD6T
F 019 Z20 399 
1679096016 
INJECTION-PUMP ASSEMBLY
PD6T
106661-5420  
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 616 622 
1671396806 
INJECTION-PUMP ASSEMBLY
PE6
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 616 623 
1671396805 
INJECTION-PUMP ASSEMBLY
PE6H
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 616 624 
1671396807 
INJECTION-PUMP ASSEMBLY
PE6HT03
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 616 625 
1671396808 
INJECTION-PUMP ASSEMBLY
PE6HT03
 
1679096515 
INJECTION-PUMP ASSEMBLY
PE6T04
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 616 626 
1670096666 
INJECTION-PUMP ASSEMBLY
PE6T
9 400 616 627 
1671396813 
INJECTION-PUMP ASSEMBLY
PE6HT03
9 400 612 174 
1671396814 
INJECTION-PUMP ASSEMBLY
PE6HT03
Back to top