Rating:
Information injection-pump assembly
BOSCH
9 460 612 990
9460612990
ZEXEL
104742-4141
1047424141
NISSAN-DIESEL
1670050T61
1670050t61
Components :
0. | INJECTION-PUMP ASSEMBLY | 104742-4141 |
1. | _ | |
2. | FUEL INJECTION PUMP | 104642-4141 |
3. | NUMBER PLATE | 146950-8900 |
4. | _ | |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | |
7. | NOZZLE AND HOLDER ASSY | 105101-5591 |
8. | Nozzle and Holder | 16600-01T04 |
9. | Open Pre:MPa(Kqf/cm2) | 19.6{200} |
10. | NOZZLE-HOLDER | 105031-4600 |
11. | NOZZLE | 105015-7131 |
Scheme ###:
1/6. | [1] | 146601-0700 | PACKING RING |
6. | [1] | 146100-0120 | SUPPLY PUMP |
9. | [1] | 146103-0000 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12. | [1] | 146200-0820 | DRIVE SHAFT |
12/1. | [1] | 146200-0800 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0100 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-1720 | ROLLER SET |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0100 | SLOTTED WASHER |
29. | [1] | 146220-1220 | CAM PLATE |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146300-4000 | PUMP PLUNGER |
32. | [1] | 146301-0000 | SLIDING PIECE |
33. | [1] | 146603-1100 | SHIM D17.5&7.5T1.20 |
34. | [1] | 146302-9300 | COMPRESSION SPRING |
35/1. | [0] | 146690-4400 | SHIM D18&12T0.3 |
35/1. | [0] | 146690-4500 | SHIM D18&12T0.6 |
35/1. | [0] | 146690-4600 | SHIM D18&12T0.9 |
35/1. | [0] | 146690-4700 | SHIM D18&12T1.2 |
35/1. | [0] | 146690-4800 | SHIM D18&12T1.5 |
35/1. | [0] | 146690-4900 | SHIM D18&12T1.8 |
35/1. | [0] | 146690-5000 | SHIM D18&12T2.1 |
35/1. | [0] | 146690-5400 | SHIM D18&12T0.7 |
35/1. | [0] | 146690-5500 | SHIM D18&12T0.8 |
35/1. | [0] | 146690-5600 | SHIM D18&12T1.0 |
35/1. | [0] | 146690-5700 | SHIM D18&12T1.1 |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-3820 | COVER |
38. | [2] | 146620-6300 | BLEEDER SCREW |
39. | [1] | 146310-0901 | COVER |
40. | [2] | 146620-5000 | BLEEDER SCREW |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0001 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM D17.0&5.2T0.50 |
48/1. | [1] | 146603-0100 | SHIM D17.0&5.2T0.80 |
48/1. | [1] | 146603-0200 | SHIM D17.0&5.2T1.00 |
48/1. | [1] | 146603-0300 | SHIM D17.0&5.2T1.20 |
48/1. | [1] | 146603-0400 | SHIM D17.0&5.2T1.50 |
48/1. | [1] | 146603-0500 | SHIM D17.0&5.2T1.80 |
48/1. | [1] | 146603-0600 | SHIM D17.0&5.2T2.00 |
48/1. | [1] | 146690-1400 | SHIM D17&5.2T0.9 |
48/1. | [1] | 146690-1500 | SHIM D17&5.2T1.1 |
48/1. | [1] | 146690-1600 | SHIM D17&5.2T1.3 |
48/1. | [1] | 146690-1700 | SHIM D17&5.2T1.4 |
48/1. | [1] | 146690-1800 | SHIM D17&5.2T1.6 |
48/1. | [1] | 146690-1900 | SHIM D17&5.2T1.7 |
48/1. | [1] | 146690-5800 | SHIM |
48/1. | [1] | 146690-5900 | SHIM |
48/1. | [1] | 146690-6000 | SHIM |
48/1. | [1] | 146690-6100 | SHIM |
48/1. | [1] | 146690-6200 | SHIM |
48/1. | [1] | 146690-6300 | SHIM |
48/1. | [1] | 146690-6400 | SHIM |
48/1. | [1] | 146690-6500 | SHIM |
48/1. | [1] | 146690-6600 | SHIM |
48/1. | [1] | 146690-6700 | SHIM |
48/1. | [1] | 146690-6800 | SHIM |
48/1. | [1] | 146690-6900 | SHIM |
48/1. | [1] | 146690-7000 | SHIM |
48/1. | [1] | 146690-7100 | SHIM |
48/1. | [1] | 146690-7200 | SHIM |
48/1. | [1] | 146690-7300 | SHIM |
48/1. | [1] | 146690-7400 | SHIM |
48/1. | [1] | 146690-7500 | SHIM |
48/1. | [1] | 146690-7800 | SHIM |
49. | [2] | 146234-0600 | GUIDE PIN |
50. | [1] | 146402-3320 | HYDRAULIC HEAD |
50. | [1] | 146402-3320 | HYDRAULIC HEAD |
50. | [1] | 146402-3320 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM D9.5&3.0T1.90 |
52/1. | [1] | 146420-0100 | SHIM D9.5&3.0T1.92 |
52/1. | [1] | 146420-0200 | SHIM D9.5&3.0T1.94 |
52/1. | [1] | 146420-0300 | SHIM D9.5&3.0T1.96 |
52/1. | [1] | 146420-0400 | SHIM D9.5&3.0T1.98 |
52/1. | [1] | 146420-0500 | SHIM D9.5&3.0T2.00 |
52/1. | [1] | 146420-0600 | SHIM D9.5&3.0T2.02 |
52/1. | [1] | 146420-0700 | SHIM D9.5&3.0T2.04 |
52/1. | [1] | 146420-0800 | SHIM D9.5&3.0T2.06 |
52/1. | [1] | 146420-0900 | SHIM D9.5&3.0T2.08 |
52/1. | [1] | 146420-1000 | SHIM D9.5&3.0T2.10 |
52/1. | [1] | 146420-1100 | SHIM D9.5&3.0T2.12 |
52/1. | [1] | 146420-1200 | SHIM D9.5&3.0T2.14 |
52/1. | [1] | 146420-1300 | SHIM D9.5&3.0T2.16 |
52/1. | [1] | 146420-1400 | SHIM D9.5&3.0T2.18 |
52/1. | [1] | 146420-1500 | SHIM D9.5&3.0T2.20 |
52/1. | [1] | 146420-1600 | SHIM D9.5&3.0T2.22 |
52/1. | [1] | 146420-1700 | SHIM D9.5&3.0T2.24 |
52/1. | [1] | 146420-1800 | SHIM D9.5&3.0T2.26 |
52/1. | [1] | 146420-1900 | SHIM D9.5&3.0T2.28 |
52/1. | [1] | 146420-2000 | SHIM D9.5&3.0T2.30 |
52/1. | [1] | 146420-2100 | SHIM D9.5&3.0T2.32 |
52/1. | [1] | 146420-2200 | SHIM D9.5&3.0T2.34 |
52/1. | [1] | 146420-2300 | SHIM D9.5&3.0T2.36 |
52/1. | [1] | 146420-2400 | SHIM D9.5&3.0T2.38 |
52/1. | [1] | 146420-2500 | SHIM D9.5&3.0T2.40 |
52/1. | [1] | 146420-2600 | SHIM D9.5&3.0T2.42 |
52/1. | [1] | 146420-2700 | SHIM D9.5&3.0T2.44 |
52/1. | [1] | 146420-2800 | SHIM D9.5&3.0T2.46 |
52/1. | [1] | 146420-2900 | SHIM D9.5&3.0T2.48 |
52/1. | [1] | 146420-3000 | SHIM D9.5&3.0T2.50 |
52/1. | [1] | 146420-3100 | SHIM D9.5&3.0T2.52 |
52/1. | [1] | 146420-3200 | SHIM D9.5&3.0T2.54 |
52/1. | [1] | 146420-3300 | SHIM D9.5&3.0T2.56 |
52/1. | [1] | 146420-3400 | SHIM D9.5&3.0T2.58 |
52/1. | [1] | 146420-3500 | SHIM D9.5&3.0T2.60 |
52/1. | [1] | 146420-3600 | SHIM D9.5&3.0T2.62 |
52/1. | [1] | 146420-3700 | SHIM D9.5&3.0T2.64 |
52/1. | [1] | 146420-3800 | SHIM D9.5&3.0T2.66 |
52/1. | [1] | 146420-3900 | SHIM D9.5&3.0T2.68 |
52/1. | [1] | 146420-4000 | SHIM D9.5&3.0T2.70 |
52/1. | [1] | 146420-4100 | SHIM D9.5&3.0T2.72 |
52/1. | [1] | 146420-4200 | SHIM D9.5&3.0T2.74 |
52/1. | [1] | 146420-4300 | SHIM D9.5&3.0T2.76 |
52/1. | [1] | 146420-4400 | SHIM D9.5&3.0T2.78 |
52/1. | [1] | 146420-4500 | SHIM D9.5&3.0T2.80 |
52/1. | [1] | 146420-4600 | SHIM D9.5&3.0T2.82 |
52/1. | [1] | 146420-4700 | SHIM D9.5&3.0T2.84 |
52/1. | [1] | 146420-4800 | SHIM D9.5&3.0T2.86 |
52/1. | [1] | 146420-4900 | SHIM D9.5&3.0T2.88 |
52/1. | [1] | 146420-5000 | SHIM D9.5&3.0T2.90 |
52/1. | [1] | 146420-5100 | SHIM D9.5&3.0T1.74 |
52/1. | [1] | 146420-5200 | SHIM D9.5&3.0T1.76 |
52/1. | [1] | 146420-5300 | SHIM D9.5&3.0T1.78 |
52/1. | [1] | 146420-5400 | SHIM D9.5&3.0T1.80 |
52/1. | [1] | 146420-5500 | SHIM D9.5&3.0T1.82 |
52/1. | [1] | 146420-5600 | SHIM D9.5&3.0T1.84 |
52/1. | [1] | 146420-5700 | SHIM D9.5&3.0T1.86 |
52/1. | [1] | 146420-5800 | SHIM D9.5&3.0T1.88 |
54. | [4] | 146433-0100 | GASKET D12&6.4T1.00 |
55. | [4] | 146430-1420 | DELIVERY-VALVE ASSEMBLY |
56. | [4] | 146432-0200 | COMPRESSION SPRING |
58. | [4] | 146440-0720 | FITTING |
60. | [3] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146503-5420 | GOVERNOR COVER |
67/1. | [1] | 146805-5120 | GOVERNOR COVER |
67/13. | [1] | 146621-1700 | UNION NUT |
67/14. | [1] | 146621-1700 | UNION NUT |
67/15. | [1] | 146526-2800 | BLEEDER SCREW |
67/16. | [1] | 146526-2800 | BLEEDER SCREW |
67/64. | [1] | 146925-3100 | BRACKET |
67/68. | [2] | 010206-1040 | HEX-SOCKET-HEAD CAP SCREW |
67/78. | [1] | 146600-4400 | SEAL RING |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-3400 | THREADED PIN L53.00 |
67/201B. | [1] | 146545-3500 | THREADED PIN L55.00 |
67/201C. | [1] | 146545-3600 | THREADED PIN L57.00 |
67/202. | [1] | 139208-0900 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
68. | [1] | 146513-5320 | CONTROL SHAFT |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146535-7520 | CONTROL LEVER |
72B. | [1] | 146535-7620 | CONTROL LEVER |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 146621-0700 | UNION NUT |
95. | [1] | 146565-6320 | FULCRUM LEVER |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET D11.4&8.2T1 |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0300 | UNION NUT |
108. | [1] | 146570-0100 | GOVERNOR SHAFT |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM D20.2&8.3T1.05 |
110/1. | [1] | 146571-0100 | SHIM D20.2&8.3T1.25 |
110/1. | [1] | 146571-0200 | SHIM D20.2&8.3T1.45 |
110/1. | [1] | 146571-0300 | SHIM D20.2&8.3T1.65 |
110/1. | [1] | 146571-0400 | SHIM D20.2&8.3T1.85 |
110/1. | [1] | 146571-0500 | SHIM D20.2&8.3T1.15 |
110/1. | [1] | 146571-0600 | SHIM D20.2&8.3T1.35 |
110/1. | [1] | 146571-0700 | SHIM D20.2&8.3T1.55 |
110/1. | [1] | 146571-0800 | SHIM D20.2&8.3T1.75 |
111. | [1] | 146602-0600 | PLAIN WASHER D20&8.4T1.40 |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER D17&6.4T1.60 |
115. | [1] | 146975-4200 | SLIDING SLEEVE |
116. | [1] | 146576-0200 | CAP |
117/1. | [1] | 146577-1800 | PLUG L2.10 |
117/1. | [1] | 146577-1900 | PLUG L2.30 |
117/1. | [1] | 146577-2000 | PLUG L2.50 |
117/1. | [1] | 146577-2100 | PLUG L2.70 |
117/1. | [1] | 146577-2200 | PLUG L2.90 |
117/1. | [1] | 146577-2300 | PLUG L3.10 |
117/1. | [1] | 146577-2400 | PLUG L3.30 |
117/1. | [1] | 146577-2500 | PLUG L3.50 |
117/1. | [1] | 146577-2600 | PLUG L3.70 |
117/1. | [1] | 146577-2700 | PLUG L3.90 |
117/1. | [1] | 146577-2800 | PLUG L4.10 |
117/1. | [1] | 146577-2900 | PLUG L4.30 |
117/1. | [1] | 146577-3000 | PLUG L4.50 |
117/1. | [1] | 146577-3100 | PLUG L4.70 |
117/1. | [1] | 146577-3200 | PLUG L4.90 |
117/1. | [1] | 146577-3300 | PLUG L5.10 |
117/1. | [1] | 146577-6700 | PLUG L2.2 |
117/1. | [1] | 146577-6800 | PLUG L2.4 |
117/1. | [1] | 146577-6900 | PLUG L2.6 |
117/1. | [1] | 146577-7000 | PLUG L2.8 |
117/1. | [1] | 146577-7100 | PLUG L3.0 |
117/1. | [1] | 146577-7200 | PLUG L3.2 |
117/1. | [1] | 146577-7300 | PLUG L3.4 |
117/1. | [1] | 146577-7400 | PLUG L3.6 |
117/1. | [1] | 146577-7500 | PLUG L3.8 |
117/1. | [1] | 146577-7600 | PLUG L4.0 |
117/1. | [1] | 146577-7700 | PLUG L4.2 |
117/1. | [1] | 146577-7800 | PLUG L4.4 |
117/1. | [1] | 146577-7900 | PLUG L4.6 |
117/1. | [1] | 146577-8000 | PLUG L4.8 |
117/1. | [1] | 146577-8100 | PLUG L5.0 |
117/1. | [1] | 146877-0000 | PLUG L5.2 |
117/1. | [1] | 146877-0100 | PLUG L5.3 |
117/1. | [1] | 146877-0200 | PLUG L5.4 |
117/1. | [1] | 146877-0300 | PLUG L5.5 |
117/1. | [1] | 146877-4700 | PLUG |
117/1. | [1] | 146877-4800 | PLUG |
117/1. | [1] | 146877-4900 | PLUG |
117/1. | [1] | 146877-5000 | PLUG |
123. | [4] | 139106-0200 | FLAT-HEAD SCREW |
130. | [1] | 146421-1020 | CAPSULE |
130/2. | [1] | 139508-0200 | GASKET D11.4&8.2T1 |
130/3. | [1] | 146422-0300 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0120 | CONTROL VALVE |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146650-4020 | PULLING ELECTROMAGNET |
137. | [2] | 139514-0200 | GASKET |
145. | [1] | 146621-1000 | UNION NUT |
147. | [1] | 146600-5000 | O-RING |
214. | [1] | 146541-1600 | BUSHING |
217. | [1] | 146541-3100 | SLOTTED WASHER |
218. | [1] | 146587-2400 | COILED SPRING |
219. | [1] | 146541-3000 | BUSHING |
220. | [1] | 146587-8600 | COILED SPRING |
223. | [1] | 146671-0020 | SWITCH |
225. | [1] | 146928-8800 | BRACKET |
227. | [2] | 020105-0940 | BLEEDER SCREW |
230. | [1] | 146928-5020 | BRACKET |
236. | [1] | 139006-4800 | BLEEDER SCREW |
237. | [1] | 146620-0200 | HEX-SOCKET-HEAD CAP SCREW |
240. | [1] | 146650-1320 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
243. | [1] | 146621-1000 | UNION NUT |
244. | [1] | 020118-1440 | BLEEDER SCREW |
245. | [2] | 139512-0500 | GASKET |
246. | [1] | 027412-2440 | EYE BOLT |
247. | [1] | 146665-2420 | PIPE |
251. | [1] | 014010-8140 | PLAIN WASHER D18&8.5T1.6 |
307. | [1] | 146310-2301 | CAP |
310. | [1] | 146673-5222 | POTENTCIOMETER |
800S. | [1] | 146019-4520 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0700 | PACKING RING |
804S. | [1] | 146232-0720 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
813S. | [1] | 146600-3120 | PARTS SET |
821S. | [1] | 146210-5720 | ROLLER SET |
835S. | [1] | 146598-1000 | CAP |
836S/1. | [1] | 146598-0600 | CAP L18 |
836S/1. | [1] | 146598-0700 | CAP L21 |
836S/1. | [1] | 146598-0800 | CAP L24 |
836S/1. | [1] | 146598-0900 | CAP L27 |
906. | [1] | 146950-8900 | NAMEPLATE |
Include in #2:
104742-4141
as INJECTION-PUMP ASSEMBLY
Cross reference number
BOSCH
9 460 612 990
9460612990
ZEXEL
104742-4141
1047424141
NISSAN-DIESEL
1670050T61
1670050t61
Zexel num
Bosch num
Firm num
Name
104742-4141
9 460 612 990
1670050T61 NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FD35 K 11CJ INJECTION PUMP ASSY VE4 VE
FD35 K 11CJ INJECTION PUMP ASSY VE4 VE
Calibration Data:
Adjustment conditions
Test oil
1404 Test oil ISO4113orSAEJ967d
1404 Test oil ISO4113orSAEJ967d
Test oil temperature
degC
45
45
50
Nozzle
105780-0060
Bosch type code
NP-DN0SD1510
Nozzle holder
105780-2150
Opening pressure
MPa
13
13
13.3
Opening pressure
kgf/cm2
133
133
136
Injection pipe
157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450
Inside diameter - outside diameter - length (mm) mm 2-6-450
Joint assembly
157641-4720
Tube assembly
157641-4020
Transfer pump pressure
kPa
20
20
20
Transfer pump pressure
kgf/cm2
0.2
0.2
0.2
Direction of rotation (viewed from drive side)
Right R
Right R
(Solenoid timer adjustment condition)
OFF
Injection timing adjustment
Pump speed
r/min
1000
1000
1000
Average injection quantity
mm3/st.
63.4
62.9
63.9
Difference in delivery
mm3/st.
5
Basic
*
Injection timing adjustment_02
Pump speed
r/min
2000
2000
2000
Average injection quantity
mm3/st.
20.4
16.9
23.9
Injection timing adjustment_03
Pump speed
r/min
1750
1750
1750
Average injection quantity
mm3/st.
67.5
64.5
70.5
Injection timing adjustment_04
Pump speed
r/min
1000
1000
1000
Average injection quantity
mm3/st.
63.4
62.4
64.4
Injection timing adjustment_05
Pump speed
r/min
700
700
700
Average injection quantity
mm3/st.
57.2
54.7
59.7
Injection timing adjustment_06
Pump speed
r/min
500
500
500
Average injection quantity
mm3/st.
66.7
60.2
73.2
Injection quantity adjustment
Pump speed
r/min
2000
2000
2000
Average injection quantity
mm3/st.
20.4
17.4
23.4
Difference in delivery
mm3/st.
6
Basic
*
Injection quantity adjustment_02
Pump speed
r/min
2200
2200
2200
Average injection quantity
mm3/st.
5
Governor adjustment
Pump speed
r/min
400
400
400
Average injection quantity
mm3/st.
12.9
9.9
15.9
Difference in delivery
mm3/st.
2.5
Basic
*
Governor adjustment_02
Pump speed
r/min
400
400
400
Average injection quantity
mm3/st.
12.9
9.9
15.9
Governor adjustment_03
Pump speed
r/min
600
600
600
Average injection quantity
mm3/st.
3
Timer adjustment
Pump speed
r/min
100
100
100
Average injection quantity
mm3/st.
105
85
125
Basic
*
Speed control lever angle
Pump speed
r/min
400
400
400
Average injection quantity
mm3/st.
0
0
0
Remarks
Magnet OFF at idling position
Magnet OFF at idling position
Speed control lever angle_02
Pump speed
r/min
100
100
100
Average injection quantity
mm3/st.
0
0
0
Remarks
Magnet OFF
Magnet OFF
0000000901
Pump speed
r/min
1100
1100
1100
Overflow quantity with S/T ON
cm3/min
471
342
600
Remarks
Without an O-ring
Without an O-ring
Stop lever angle
Pump speed
r/min
1100
1100
1100
Pressure with S/T ON
kPa
451
402
500
Pressure with S/T ON
kgf/cm2
4.6
4.1
5.1
Pressure with S/T OFF
kPa
333.5
304
363
Pressure with S/T OFF
kgf/cm2
3.4
3.1
3.7
Basic
*
Stop lever angle_02
Pump speed
r/min
1100
1100
1100
Pressure with S/T ON
kPa
451
402
500
Pressure with S/T ON
kgf/cm2
4.6
4.1
5.1
Pressure with S/T OFF
kPa
333.5
304
363
Pressure with S/T OFF
kgf/cm2
3.4
3.1
3.7
Stop lever angle_03
Pump speed
r/min
1400
1400
1400
Pressure with S/T OFF
kPa
411.5
382
441
Pressure with S/T OFF
kgf/cm2
4.2
3.9
4.5
Stop lever angle_04
Pump speed
r/min
1600
1600
1600
Pressure with S/T OFF
kPa
460.5
431
490
Pressure with S/T OFF
kgf/cm2
4.7
4.4
5
Stop lever angle_05
Pump speed
r/min
1750
1750
1750
Pressure with S/T OFF
kPa
500
461
539
Pressure with S/T OFF
kgf/cm2
5.1
4.7
5.5
0000001101
Pump speed
r/min
1100
1100
1100
Timer stroke with S/T OFF
mm
0.8
0.6
1
Basic
*
Remarks
First
First
_02
Pump speed
r/min
1600
1600
1600
Timer stroke with S/T OFF
mm
3.7
3.5
3.9
Basic
*
Remarks
Second
Second
_03
Pump speed
r/min
1000
1000
1000
Timer stroke with S/T ON
mm
1.7
0.8
2.6
_04
Pump speed
r/min
1100
1100
1100
Timer stroke with S/T OFF
mm
0.8
0.5
1.1
_05
Pump speed
r/min
1400
1400
1400
Timer stroke with S/T OFF
mm
1.7
1.1
2.3
_06
Pump speed
r/min
1600
1600
1600
Timer stroke with S/T OFF
mm
3.7
3.4
4
_07
Pump speed
r/min
1750
1750
1750
Timer stroke with S/T OFF
mm
5.2
4.7
5.7
0000001201
Max. applied voltage
V
16
16
16
Test voltage
V
25
24
26
Timing setting
K dimension
mm
3.1
3
3.2
KF dimension
mm
5.8
5.7
5.9
MS dimension
mm
0.7
0.6
0.8
Pre-stroke
mm
0.3
0.28
0.32
Control lever angle alpha
deg.
25
21
29
Control lever angle beta
deg.
36
31
41
Test data Ex:
0000001801 TIMER STROKE
Mechanical 2-stage timer adjustment procedure
1. 1st timer stroke adjustment
Roughly adjust the 1st timer stroke adjustment value using the cover side shim, then fine adjust using the pump chamber pressure.
2. 2nd timer stroke adjustment
Adjust the 2nd timer stroke adjustment value using the externally adjustable cover.
3. Sealing cap installation
After completing adjustment, seal using the sealing cap.
A:Timer piston
B:Cover-side shim
C:Sealing cap
D:Nut tightening torque is T.
----------
----------
T=7~10N-m(0.7~1.0kgf-m) L=2++mm
----------
----------
T=7~10N-m(0.7~1.0kgf-m) L=2++mm
0000001901 TEMP. ADJUST FULL-LOAD SCREW
Temporary full load screw adjustment
At reassembly set the distance that the full load screw protrudes at L.
----------
L=14+-0.5mm
----------
L=14+-0.5mm
----------
L=14+-0.5mm
----------
L=14+-0.5mm
0000002001 POTENTIOMETER ADJUSTMENT
Adjustment of the potentiometer
When the potentiometer's applied voltage is Vi, adjust so that the output voltage is Vo when the control lever is at the idle position.
Connect the connector wiring so that the voltage increases when the control lever is moved to the full side.
Vi = applied voltage
G = Connection D, at F, switch OFF to ON
H = at D, E, switch ON to OFF
I = potentiometer output at B, C
J = switch ON to OFF
K = key switch OFF to ON
M = lever position (from idle)
----------
Vi=10V Vo=0.9+-0.03V
----------
M1=4.6+-6deg M2=23.6+-3deg Vi=10V
----------
Vi=10V Vo=0.9+-0.03V
----------
M1=4.6+-6deg M2=23.6+-3deg Vi=10V
0000002101 ACCELERATOR SWITCH ADJ
Accelerator switch adjustment
ON - OFF changeover point: from idle to a (shim thickness E = L)
Idle-c: ON
d ~ full: OFF
E = shim thickness
Insert a block gauge thickness L1 (corresponding to lever position a) between the idle set screw and the control lever and set the switch using the screw (A) so that it moves from ON to OFF. Then tighten the nut (B).
C = idle lever position
D = 2 of 2 locations
----------
a=3.5deg c=3.5deg d=3.5deg L=2.3+-0.1mm L1=2.3mm
----------
a=3.5deg b=25+-4deg SW=SW10 T1=5~7N-m(0.5~0.7kgf-m) T2=7~10N-m(0.7~1kgf-m) L1=2.3mm
----------
a=3.5deg c=3.5deg d=3.5deg L=2.3+-0.1mm L1=2.3mm
----------
a=3.5deg b=25+-4deg SW=SW10 T1=5~7N-m(0.5~0.7kgf-m) T2=7~10N-m(0.7~1kgf-m) L1=2.3mm
Have questions with 104742-4141?
Group cross 104742-4141 ZEXEL
Nissan-Diesel
104742-4141
9 460 612 990
1670050T61
INJECTION-PUMP ASSEMBLY
FD35
FD35