101607-9750 ZEXEL 9 400 615 760 BOSCH INJECTION-PUMP ASSEMBLY 9400615760 1016079750

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101607-9750 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 760 9400615760

ZEXEL 101607-9750 1016079750

Include in #1:

101402-8070 as _

Cross reference number

BOSCH 9 400 615 760 9400615760

ZEXEL 101607-9750 1016079750

Zexel num

Bosch num

Firm num

Name

101607-9750

9 400 615 760

CHINA

INJECTION-PUMP ASSEMBLY
6110 K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-1520

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.3 3.25 3.35

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 11.9

Pump speed r/min 1450 1450 1450

Average injection quantity mm3/st. 73.5 71.5 75.5

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point C

Rack position 9.9+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 10.5 9 12

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Injection quantity adjustment_03

Adjusting point D

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 74.5 74.5

Fixing the lever *

Remarks
After startup boost setting

Timer adjustment

Pump speed r/min 500

Advance angle deg. 0.5

Timer adjustment_02

Pump speed r/min 1000

Advance angle deg. 3.2 2.7 3.7

Timer adjustment_03

Pump speed r/min 1500

Advance angle deg. 6.5 6 7

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Tolerance for racks not indicated: +-0.05mm. (4)Excess fuel setting for starting: SXL (N = N1) (5)Damper spring setting (6)Rack difference between N = N2 and N = N3
----------
RT=1 TH=2.4mm SXL=12.6+0.2mm N1=450r/min N2=1450r/min N3=900r/min
----------

Speed control lever angle

F:Full speed
----------

----------
a=10deg+-5deg

0000000901

F:Full load I:Idle (1)Use the hole at R = aa (2)Stopper bolt setting
----------
aa=55mm
----------
a=5.5deg+-5deg b=22deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Drive side (2)Rack position = aa (3)Rack position bb (4)Use the pin above R = cc (5)Stopper bolt setting (6)Stopper bolt setting
----------
aa=6.5+-0.1mm bb=17.5+-0.1mm cc=30mm
----------
a=20deg+-5deg b=35deg+-5deg

Timing setting

(1)Pump vertical direction (2)Coupling's key groove position for the No. 6 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(30deg)