101603-2701 ZEXEL 9 400 615 061 BOSCH INJECTION-PUMP ASSEMBLY 9400615061 1016032701 220205780a


101603-2701 INJECTION-PUMP ASSEMBLY
Rating:
30
Buy INJECTION-PUMP ASSEMBLY 101603-2701 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 061 9400615061
ZEXEL 101603-2701 1016032701
HINO 220205780A 220205780a

Include in #1:

Cross reference number

BOSCH 9 400 615 061 9400615061
ZEXEL 101603-2701 1016032701
HINO 220205780A 220205780a


Zexel num
Bosch num
Firm num
Name
101603-2701 
9 400 615 061 
220205780A  HINO
INJECTION-PUMP ASSEMBLY
H07C-T K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-0920
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   4.8 4.77 4.83
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.75 60.25
Difference between angles 2
Cyl.1-2
deg.   120 119.75 120.25
Difference between angles 3
Cal 1-6
deg.   180 179.75 180.25
Difference between angles 4
Cal 1-3
deg.   240 239.75 240.25
Difference between angles 5
Cal 1-5
deg.   300 299.75 300.25
Injection quantity adjustment
Adjusting point   A
Rack position   10.6
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   108.5 107 110
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the lever   *
Boost pressure kPa   36 36
Boost pressure mmHg   270 270
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.2+-0.5
Pump speed r/min   455 455 455
Average injection quantity mm3/st.   10 9 11
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   130 130 140
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   800 800 800
Rack position   9.15
Boost pressure kPa   5.3 4 6.6
Boost pressure mmHg   40 30 50
Boost compensator adjustment_02
Pump speed r/min   800 800 800
Rack position   10.6
Boost pressure kPa   22.7 16 29.4
Boost pressure mmHg   170 120 220
Timer adjustment
Pump speed r/min   900--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   850
Advance angle deg.   0.3
Timer adjustment_03
Pump speed r/min   1000
Remarks
Measure the actual advance angle.
 
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   1.5 1.2 1.8
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101603-2701
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Main spring setting (5)Set idle sub-spring (6)Boost compensator stroke: BCL
----------
K=7 BCL=(1.45)mm
----------

Speed control lever angle

Test data 101603-2701
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt setting
----------
aa=100mm
----------
a=(1deg)+-5deg b=(19deg)+-5deg

Stop lever angle

Test data 101603-2701
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Normal
----------
aa=0r/min bb=1-0.5mm
----------
a=21deg+-5deg b=(55deg)

Timing setting

Test data 101603-2701
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(50deg)




Have questions with 101603-2701?





Group cross 101603-2701 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Hino 

101603-2701  
9 400 615 061 
220205780A 
INJECTION-PUMP ASSEMBLY
H07C-T
9 400 611 994 
220205690A 
INJECTION-PUMP ASSEMBLY
H07C-T
9 400 611 598 
220205820A 
INJECTION-PUMP ASSEMBLY
W06D
9 400 612 944 
220205860A 
INJECTION-PUMP ASSEMBLY
H07C-T
9 400 615 062 
220206020A 
INJECTION-PUMP ASSEMBLY
W06D
9 400 612 531 
220206210A 
INJECTION-PUMP ASSEMBLY
J08C
9 400 612 303 
220206240A 
INJECTION-PUMP ASSEMBLY
J08C
9 400 612 747 
220206240B 
INJECTION-PUMP ASSEMBLY
J08C
9 400 615 063 
220206241A 
INJECTION-PUMP ASSEMBLY
J08C
 
220206340A 
INJECTION-PUMP ASSEMBLY
W06D-TI
9 400 615 064 
220206340B 
INJECTION-PUMP ASSEMBLY
W06D-TI
 
220206350A 
INJECTION-PUMP ASSEMBLY
J08C-T
9 400 615 065 
220206350B 
INJECTION-PUMP ASSEMBLY
J08C-T
F 019 Z10 797 
220206350C 
INJECTION-PUMP ASSEMBLY
J08C-T
 
220206380A 
INJECTION-PUMP ASSEMBLY
J08C
9 400 613 368 
220206380B 
INJECTION-PUMP ASSEMBLY
J08C
F 019 Z10 982 
220206381A 
INJECTION-PUMP ASSEMBLY
J08C
Back to top