101603-2781 ZEXEL 9 400 615 065 BOSCH INJECTION-PUMP ASSEMBLY 9400615065 1016032781 220206350b


101603-2781 INJECTION-PUMP ASSEMBLY
Rating:
42
Buy INJECTION-PUMP ASSEMBLY 101603-2781 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 065 9400615065
ZEXEL 101603-2781 1016032781
HINO 220206350B 220206350b

Include in #1:

Cross reference number

BOSCH 9 400 615 065 9400615065
ZEXEL 101603-2781 1016032781
HINO 220206350B 220206350b


Zexel num
Bosch num
Firm num
Name
101603-2781 
101603-2782 
9 400 615 065 
220206350B  HINO
INJECTION-PUMP ASSEMBLY
J08C-T * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131425-0620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.8 3.77 3.83
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.75 60.25
Difference between angles 2
Cyl.1-2
deg.   120 119.75 120.25
Difference between angles 3
Cal 1-6
deg.   180 179.75 180.25
Difference between angles 4
Cal 1-3
deg.   240 239.75 240.25
Difference between angles 5
Cal 1-5
deg.   300 299.75 300.25
Injection quantity adjustment
Adjusting point   A
Rack position   11.4
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   133.5 131.5 135.5
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the lever   *
Boost pressure kPa   34 34
Boost pressure mmHg   255 255
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.5+-0.5
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   8 7 9
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   E
Rack position   11.6++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   100 100 110
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   10.4
Boost pressure kPa   18 15.3 20.7
Boost pressure mmHg   135 115 155
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   10.7
Boost pressure kPa   20.7 20.7 20.7
Boost pressure mmHg   155 155 155
Timer adjustment
Pump speed r/min   0
Advance angle deg.   0 0 0
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   0 0 0
Remarks
Measure speed (beginning of operation).
 
Timer adjustment_03
Pump speed r/min   800-50
Advance angle deg.   -1.5 -1.8 -1.2
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101603-2781
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke (5)Rack difference between N = N1 and N = N2 (6)Idle sub spring setting: L1.
----------
K=15 N1=1050r/min N2=500r/min L1=7.8+-0.2mm
----------

Speed control lever angle

Test data 101603-2781
F:Full speed I:Idle (1)Stopper bolt setting (2)Use the hole at R = aa
----------
aa=100mm
----------
a=(7deg)+-5deg b=(23deg)+-5deg

Stop lever angle

Test data 101603-2781
N:Pump normal S:Stop the pump. (1)Normal (2)Rack position = aa, speed = bb (stamp at delivery) (3)Use the hole above R = cc
----------
aa=1-0.5mm bb=0r/min cc=25mm
----------
a=21deg+-5deg b=(55deg)

Timing setting

Test data 101603-2781
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(20deg)




Have questions with 101603-2781?





Group cross 101603-2781 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Hino 

9 400 615 061 
220205780A 
INJECTION-PUMP ASSEMBLY
H07C-T
9 400 611 994 
220205690A 
INJECTION-PUMP ASSEMBLY
H07C-T
9 400 611 598 
220205820A 
INJECTION-PUMP ASSEMBLY
W06D
9 400 612 944 
220205860A 
INJECTION-PUMP ASSEMBLY
H07C-T
9 400 615 062 
220206020A 
INJECTION-PUMP ASSEMBLY
W06D
9 400 612 531 
220206210A 
INJECTION-PUMP ASSEMBLY
J08C
9 400 612 303 
220206240A 
INJECTION-PUMP ASSEMBLY
J08C
9 400 612 747 
220206240B 
INJECTION-PUMP ASSEMBLY
J08C
9 400 615 063 
220206241A 
INJECTION-PUMP ASSEMBLY
J08C
 
220206340A 
INJECTION-PUMP ASSEMBLY
W06D-TI
9 400 615 064 
220206340B 
INJECTION-PUMP ASSEMBLY
W06D-TI
 
220206350A 
INJECTION-PUMP ASSEMBLY
J08C-T
101603-2781  

101603-2782 
9 400 615 065 
220206350B 
INJECTION-PUMP ASSEMBLY
J08C-T
F 019 Z10 797 
220206350C 
INJECTION-PUMP ASSEMBLY
J08C-T
 
220206380A 
INJECTION-PUMP ASSEMBLY
J08C
9 400 613 368 
220206380B 
INJECTION-PUMP ASSEMBLY
J08C
F 019 Z10 982 
220206381A 
INJECTION-PUMP ASSEMBLY
J08C
Back to top