101402-2100 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014022100 220203170a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101402-2100 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101402-2100 1014022100

HINO 220203170A 220203170a

Cross reference number

ZEXEL 101402-2100 1014022100

HINO 220203170A 220203170a

Zexel num

Bosch num

Firm num

Name

101402-2100
101402-2102

220203170A HINO

INJECTION-PUMP ASSEMBLY
W04C-TI *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-6420

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 3.2 3.17 3.23

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.75 90.25

Difference between angles 2
Cal 1-4 deg. 180 179.75 180.25

Difference between angles 3
Cyl.1-2 deg. 270 269.75 270.25

Injection quantity adjustment

Adjusting point A

Rack position 10.7

Pump speed r/min 1510 1510 1510

Average injection quantity mm3/st. 113 111 115

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Boost pressure kPa 60 60

Boost pressure mmHg 450 450

Injection quantity adjustment_02

Adjusting point B

Rack position 7+-0.5

Pump speed r/min 280 280 280

Average injection quantity mm3/st. 8.9 7.4 10.4

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 600 600 600

Rack position R1-1.6

Boost pressure kPa 14.7 12 17.4

Boost pressure mmHg 110 90 130

Boost compensator adjustment_02

Pump speed r/min 600 600 600

Rack position R1(10.7)

Boost pressure kPa 46.7 40 53.4

Boost pressure mmHg 350 300 400

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Set idle sub-spring (3)Main spring setting (4)Boost compensator stroke: BCL
----------
K=9 BCL=1.6+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=15deg+-5deg b=27deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Speed = aa, rack position = bb (sealed at shipping)
----------
aa=0r/min bb=1-0.2mm
----------
a=21deg+-5deg b=(55deg)

Timing setting

(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)