106673-2631 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066732631


106673-2631 INJECTION-PUMP ASSEMBLY
Rating:
67
Buy INJECTION-PUMP ASSEMBLY 106673-2631 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106673-2631 1066732631

Service parts 106673-2631 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106061-5030
3. GOVERNOR 105407-4950
4. SUPPLY PUMP 105207-1210
5. AUTOM. ADVANCE MECHANIS 105636-1700
6. COUPLING PLATE 105662-0710
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5721
11. Nozzle and Holder ME056275
12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}
13. NOZZLE-HOLDER 105041-4420
14. NOZZLE 105015-5330
15. NOZZLE SET

Include in #1:

106673-2631 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106673-2631 1066732631


Zexel num
Bosch num
Firm num
Name
106673-2631 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.3
Pump speed r/min   875 875 875
Average injection quantity mm3/st.   140.3 137.3 143.3
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   5.4+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   11.2 8.6 13.8
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   136 126 146
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   -
Advance angle deg.   0.5
Remarks
Measure the actual speed.
 
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   2 2 2
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106673-2631
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT
----------
K=10
----------

Speed control lever angle

Test data 106673-2631
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(19deg)+-5deg b=(4deg)+-5deg

Stop lever angle

Test data 106673-2631
N:Pump normal S:Stop the pump.
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 106673-2631
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(7deg)




Have questions with 106673-2631?





Group cross 106673-2631 ZEXEL

Mitsubishi 

9 400 617 249 
ME056906 
INJECTION-PUMP ASSEMBLY
6D22
9 400 617 250 
ME1E6057G 
INJECTION-PUMP ASSEMBLY
6D22T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 251 
ME157578 
INJECTION-PUMP ASSEMBLY
6D22TC
F 019 Z10 639 
 
INJECTION-PUMP ASSEMBLY
106673-2631  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 252 
ME157577 
INJECTION-PUMP ASSEMBLY
6D22T
9 400 617 253 
ME056940 
INJECTION-PUMP ASSEMBLY
6D22T2
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 254 
ME056939 
INJECTION-PUMP ASSEMBLY
6D22T2
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 255 
ME056945 
INJECTION-PUMP ASSEMBLY
6D22T2
9 400 617 256 
ME150405 
INJECTION-PUMP ASSEMBLY
6D22T2
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 617 257 
ME157728 
INJECTION-PUMP ASSEMBLY
6D22T
9 400 617 258 
ME157762 
INJECTION-PUMP ASSEMBLY
6D22TC
Back to top