106671-9851 ZEXEL F 019 Z20 099 BOSCH INJECTION-PUMP ASSEMBLY f019z20099 1066719851


106671-9851 INJECTION-PUMP ASSEMBLY
Rating:
9
Buy INJECTION-PUMP ASSEMBLY 106671-9851 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z20 099 f019z20099
ZEXEL 106671-9851 1066719851

Cross reference number

BOSCH F 019 Z20 099 f019z20099
ZEXEL 106671-9851 1066719851


Zexel num
Bosch num
Firm num
Name
106671-9851 
F 019 Z20 099 
  DPICO
INJECTION-PUMP ASSEMBLY
Q Q

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4420
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.4 4.35 4.45
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   13.1
Pump speed r/min   700 700 700
Each cylinder's injection qty mm3/st.   169 164.8 173.2
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   R2(5.6)
Pump speed r/min   325 325 325
Each cylinder's injection qty mm3/st.   13.6 11.8 15.4
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(13.1)
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   169 168 170
Basic   *
Fixing the lever   *
Boost pressure kPa   107 107
Boost pressure mmHg   800 800
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1(13.1)
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   154 150 158
Fixing the lever   *
Boost pressure kPa   107 107
Boost pressure mmHg   800 800
Injection quantity adjustment_05
Adjusting point   G
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   120 80 160
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   600 600 600
Rack position   R3-3.4
Boost pressure kPa   4 2.7 5.3
Boost pressure mmHg   30 20 40
Boost compensator adjustment_02
Pump speed r/min   600 600 600
Rack position   R3(R1(13 .1))
Boost pressure kPa   93.3 90 96.6
Boost pressure mmHg   700 675 725
Timer adjustment
Pump speed r/min   -
Advance angle deg.   1.5 1 2
Load   0/4
Remarks
Measure speed (beginning of operation).
 
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   0 0 0
Load   0/4
Remarks
Measure the actual speed.
 
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   0 0 0
Load   4/4
Remarks
Measure the actual speed.
 
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   3.5 2.8 4
Load   4/4
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106671-9851
N:Pump speed R:Rack position (mm) (1)Deliver with positive torque control spring not operating (2)Boost compensator stroke: BCL (3)Damper spring setting: DL
----------
BCL=3.4+-0.1mm DL=(R2-0.2)-0.2mm
----------

Speed control lever angle

Test data 106671-9851
F:Full speed
----------

----------
a=(18deg)+-5deg

0000000901

Test data 106671-9851
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=21deg+-5deg b=(36.5deg)+-3deg

Stop lever angle

Test data 106671-9851
N:Pump normal S:Stop the pump. (1)Rack position = actual measurement (2)Stopper bolt setting (3)(Actual measurement)
----------

----------
a=38deg+-5deg

Timing setting

Test data 106671-9851
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(6deg)




Have questions with 106671-9851?





Group cross 106671-9851 ZEXEL

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
DE12NA
 
 
INJECTION-PUMP ASSEMBLY
6D22
F 019 Z20 098 
 
INJECTION-PUMP ASSEMBLY
Q
 
 
INJECTION-PUMP ASSEMBLY
Q
106671-9851  
F 019 Z20 099 
 
INJECTION-PUMP ASSEMBLY
Q

Yanmar 

9 400 613 061 
12667151010 
INJECTION-PUMP ASSEMBLY
6HA2MHTE

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
Q
 
 
INJECTION-PUMP ASSEMBLY
Q
F 019 Z20 100 
 
INJECTION-PUMP ASSEMBLY
Q

Komatsu 

 
 
INJECTION-PUMP ASSEMBLY
SA6D140

Dpico 

F 019 Z20 101 
 
INJECTION-PUMP ASSEMBLY
Q-DD
Back to top