101631-9881 ZEXEL 9 400 615 930 BOSCH INJECTION-PUMP ASSEMBLY 9400615930 1016319881 1671290117


101631-9881 INJECTION-PUMP ASSEMBLY
Rating:
25
Buy INJECTION-PUMP ASSEMBLY 101631-9881 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 930 9400615930
ZEXEL 101631-9881 1016319881
NISSAN-DIESEL 1671290117 1671290117

Include in #2:

Cross reference number

BOSCH 9 400 615 930 9400615930
ZEXEL 101631-9881 1016319881
NISSAN-DIESEL 1671290117 1671290117


Zexel num
Bosch num
Firm num
Name
101631-9881 
9 400 615 930 
1671290117  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
SD33 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.3 2.25 2.35
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   14.7
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   35.2 34.2 36.2
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   14.1
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   31.6 30.1 33.1
Max. variation between cylinders %   0 -4 4
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   -
Rack position   10.6+-0. 5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   7.5 6.4 8.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Timer adjustment
Pump speed r/min   500+-50
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   1 0.5 1.5
Timer adjustment_03
Pump speed r/min   (895)
Advance angle deg.   2 1.5 2.5
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   7.5 7.5 7.5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101631-9881
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm.
----------
K=16
----------

Speed control lever angle

Test data 101631-9881
F:Full speed I:Idle S:Stop (1)Set the pump speed at aa. ( At delivery ) (2)When pump speed set at bb (3)Stopper bolt setting
----------
aa=910r/min bb=750r/min
----------
a=9deg+-5deg b=32deg+-3deg c=32deg+-5deg d=7deg+-5deg

Stop lever angle

Test data 101631-9881
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=19deg+-5deg b=53deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Test data 101631-9881
Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)-
----------

----------
a1=B a2=- r1=750r/min r2=- Q1=35.2+-1mm3/st Q2=- c1=+-2.5% c2=- a3=18 a4=15 r3=900r/min r4=750r/min

Timing setting

Test data 101631-9881
(1)Pump vertical direction (2)Position of gear mark 'Y' at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(130deg)




Have questions with 101631-9881?





Group cross 101631-9881 ZEXEL

Nissan-Diesel 

 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 101 
16700C8600 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 280 
16700C8607 
INJECTION-PUMP ASSEMBLY
SD33
 
1670090069 
INJECTION-PUMP ASSEMBLY
SD33
 
1679090205 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 047 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 281 
16700C8608 
INJECTION-PUMP ASSEMBLY
SD33
 
1679090213 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
16700C8609 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 147 
1679090263 
INJECTION-PUMP ASSEMBLY
SD33
9 400 619 799 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

101631-9881  
9 400 615 930 
1671290117 
INJECTION-PUMP ASSEMBLY
SD33
9 400 619 659 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

F 01G 09U 06C 
1679090279 
INJECTION-PUMP ASSEMBLY
SD3304
Back to top