101605-9620 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016059620


101605-9620 INJECTION-PUMP ASSEMBLY
Rating:
14
Buy INJECTION-PUMP ASSEMBLY 101605-9620 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101605-9620 1016059620

Cross reference number

ZEXEL 101605-9620 1016059620


Zexel num
Bosch num
Firm num
Name
101605-9620 
101605-9621 
 
  DAEWOO
INJECTION-PUMP ASSEMBLY
DB58T *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.1
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   73.5 72 75
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Boost pressure kPa   40 40
Boost pressure mmHg   300 300
Injection quantity adjustment_02
Adjusting point   -
Rack position   6.8+-0.5
Pump speed r/min   475 475 475
Average injection quantity mm3/st.   9.4 8.1 10.7
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   E
Rack position   -
Pump speed r/min   90 90 90
Average injection quantity mm3/st.   65 65 85
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   R1-0.25
Boost pressure kPa   20 17.3 22.7
Boost pressure mmHg   150 130 170
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   R1(9.1)
Boost pressure kPa   26.7 26.7 26.7
Boost pressure mmHg   200 200 200

Test data Ex:

Governor adjustment

Test data 101605-9620
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL (5)Main spring setting (6)Set idle sub-spring
----------
K=5 BCL=0.25+-0.1mm
----------

Speed control lever angle

Test data 101605-9620
F:Full speed I:Idle (1)- (2)Stopper bolt setting
----------

----------
a=1deg+-5deg b=17deg+-5deg

Stop lever angle

Test data 101605-9620
N:Normal S:Stop (1)Use the hole at R = aa (2)Speed = bb, rack position = cc (sealed at delivery)
----------
aa=40mm bb=0r/min cc=1-0.5mm
----------
a=44.5deg+-5deg b=(50deg)

Timing setting

Test data 101605-9620
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(100deg)




Have questions with 101605-9620?





Group cross 101605-9620 ZEXEL

Daewoo 

 
 
INJECTION-PUMP ASSEMBLY
D1146TI
9 400 615 386 
 
INJECTION-PUMP ASSEMBLY
D1146TI
9 400 615 387 
 
INJECTION-PUMP ASSEMBLY
DB58TI
101605-9620  

101605-9621 
 
 
INJECTION-PUMP ASSEMBLY
DB58T
9 400 611 164 
 
INJECTION-PUMP ASSEMBLY
DB58T
9 400 615 388 
 
INJECTION-PUMP ASSEMBLY
DB58NA

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
DB58T

Nissan-Diesel 

9 400 615 389 
16790Z5611 
INJECTION-PUMP ASSEMBLY
FE654
9 400 615 390 
16712Z5513 
INJECTION-PUMP ASSEMBLY
FE655
9 400 619 927 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 612 999 
167004K000 
INJECTION-PUMP ASSEMBLY
FE6
9 400 611 441 
167004K001 
INJECTION-PUMP ASSEMBLY
FE6
Back to top