101605-3071 ZEXEL 9 400 613 028 BOSCH INJECTION-PUMP ASSEMBLY 9400613028 1016053071 6137721620


101605-3071 INJECTION-PUMP ASSEMBLY
Rating:
79
Buy INJECTION-PUMP ASSEMBLY 101605-3071 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 028 9400613028
ZEXEL 101605-3071 1016053071
KOMATSU 6137721620 6137721620

Service parts 101605-3071 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-2530
3. GOVERNOR 105410-7730
4. SUPPLY PUMP 105210-4560
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-0371
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5430
11. Nozzle and Holder 6137-12-3100
12. Open Pre:MPa(Kqf/cm2) 22.1{225}
13. NOZZLE-HOLDER 105031-4480
14. NOZZLE 105015-5020
15. NOZZLE SET

Include in #1:

101605-3071 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 613 028 9400613028
ZEXEL 101605-3071 1016053071
KOMATSU 6137721620 6137721620


Zexel num
Bosch num
Firm num
Name
101605-3071 
101605-3900 
9 400 613 028 
6137721620  KOMATSU
INJECTION-PUMP ASSEMBLY
S6D105 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.3 3.25 3.35
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.5
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   104 103 105
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   10 8.5 11.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101605-3071
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Rack difference between N = N1 and N = N2 (3)Idle sub spring setting: L1.
----------
K=13 N1=800r/min N2=500r/min L1=6-0.5mm
----------

Speed control lever angle

Test data 101605-3071
I:Idle (1)Set the pump speed at aa (2)Set speed at bb (setting at shipping). (3)Stopper bolt setting
----------
aa=750r/min bb=900r/min
----------
a=(6deg)+-5deg b=(6deg)+-5deg c=(22deg)+-5deg

Stop lever angle

Test data 101605-3071
N:Pump normal S:Stop the pump. (1)At shipping
----------

----------
a=27deg+-5deg b=53deg+-5deg




Have questions with 101605-3071?





Group cross 101605-3071 ZEXEL

Komatsu 

 
6137721110 
INJECTION-PUMP ASSEMBLY
S6D105
9 400 610 139 
6137721190 
INJECTION-PUMP ASSEMBLY
S6D105
 
6137711280 
INJECTION-PUMP ASSEMBLY
S6D105
 
 
INJECTION-PUMP ASSEMBLY
S6D105
9 400 612 338 
6137721340 
INJECTION-PUMP ASSEMBLY
S6D105
9 400 615 324 
6137721350 
INJECTION-PUMP ASSEMBLY
S6D105
 
6136721850 
INJECTION-PUMP ASSEMBLY
6D105
9 400 615 325 
6137721200 
INJECTION-PUMP ASSEMBLY
S6D105
9 400 615 326 
6138711470 
INJECTION-PUMP ASSEMBLY
S6D110
 
 
INJECTION-PUMP ASSEMBLY
S6D105
101605-3071  

101605-3900 
9 400 613 028 
6137721620 
INJECTION-PUMP ASSEMBLY
S6D105
 
 
INJECTION-PUMP ASSEMBLY
S6D110
9 400 615 327 
6138721470 
INJECTION-PUMP ASSEMBLY
S6D110
 
6138711440 
INJECTION-PUMP ASSEMBLY
SA6D110
Back to top