101601-5350 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016015350 220005800a


101601-5350 INJECTION-PUMP ASSEMBLY
Rating:
39
Buy INJECTION-PUMP ASSEMBLY 101601-5350 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101601-5350 1016015350
HINO 220005800A 220005800a

Cross reference number

ZEXEL 101601-5350 1016015350
HINO 220005800A 220005800a


Zexel num
Bosch num
Firm num
Name
101601-5350 
 
220005800A  HINO
INJECTION-PUMP ASSEMBLY
EH700 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-0920
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.1 3.07 3.13
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.75 60.25
Difference between angles 2
Cyl.1-2
deg.   120 119.75 120.25
Difference between angles 3
Cal 1-6
deg.   180 179.75 180.25
Difference between angles 4
Cal 1-3
deg.   240 239.75 240.25
Difference between angles 5
Cal 1-5
deg.   300 299.75 300.25
Injection quantity adjustment
Adjusting point   -
Rack position   8.6
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   68.6 67.6 69.6
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   6.7+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   8 7 9
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(8.6)
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   68.6 67.6 69.6
Basic   *
Fixing the lever   *
Timer adjustment
Pump speed r/min   1400--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1350
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1400
Advance angle deg.   1.5
Timer adjustment_04
Pump speed r/min   1600
Advance angle deg.   5 4.5 5.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101601-5350
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT: RAL
----------
T1=56 RAL=11.6+0.2mm
----------

Speed control lever angle

Test data 101601-5350
F:Full speed I:Idle (1)Stopper bolt set position 'I'
----------

----------
a=32deg+-5deg b=41deg+-3deg

Stop lever angle

Test data 101601-5350
N:Pump normal S:Stop the pump.
----------

----------
a=5deg+-5deg b=40deg+-5deg

Timing setting

Test data 101601-5350
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101601-5350?





Group cross 101601-5350 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Hino 

9 400 614 608 
220005680A 
INJECTION-PUMP ASSEMBLY
W06D
9 400 614 609 
220005670A 
INJECTION-PUMP ASSEMBLY
H07C
9 400 619 840 
 
INJECTION-PUMP ASSEMBLY

Hino 

 
220005690A 
INJECTION-PUMP ASSEMBLY
W06E
9 400 619 591 
 
INJECTION-PUMP ASSEMBLY

Hino 

 
220005710A 
INJECTION-PUMP ASSEMBLY
W06E
 
220005720A 
INJECTION-PUMP ASSEMBLY
EL100
101601-5350  
 
220005800A 
INJECTION-PUMP ASSEMBLY
EH700
 
220203080A 
INJECTION-PUMP ASSEMBLY
W06D
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Hino 

9 400 611 428 
220203081A 
INJECTION-PUMP ASSEMBLY
W06D
 
220005940A 
INJECTION-PUMP ASSEMBLY
W06E
 
 
INJECTION-PUMP ASSEMBLY

Hino 

 
220005941A 
INJECTION-PUMP ASSEMBLY
9 400 614 610 
220005941A 
INJECTION-PUMP ASSEMBLY
W06E
 
 
INJECTION-PUMP ASSEMBLY

Hino 

 
220005970A 
INJECTION-PUMP ASSEMBLY
W06D
9 400 614 611 
220006070A 
INJECTION-PUMP ASSEMBLY
EH700
Back to top