106684-4540 ZEXEL 9 400 617 692 BOSCH INJECTION-PUMP ASSEMBLY 9400617692 1066844540 3266500210

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106684-4540 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 692 9400617692

ZEXEL 106684-4540 1066844540

MITSUBISHI-HEAV 3266500210 3266500210

Cross reference number

BOSCH 9 400 617 692 9400617692

ZEXEL 106684-4540 1066844540

MITSUBISHI-HEAV 3266500210 3266500210

Zexel num

Bosch num

Firm num

Name

106684-4540
106684-4541

9 400 617 692

3266500210 MITSUBISHI-HEAV

INJECTION-PUMP ASSEMBLY
S12A2 * K 14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8130

Bosch type code EFEP215A

Nozzle 105780-0050

Bosch type code DN6TD119NP1T

Nozzle holder 105780-2090

Bosch type code EFEP215

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-4-1000

Overflow valve 131424-3420

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 255 255 255

Tester oil delivery pressure kgf/cm2 2.6 2.6 2.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 2.8 2.75 2.85

Beginning of injection position
Opposite to the driving side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 14.1

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 520 511 529

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the rack *

Rack limit *

Injection quantity adjustment_02

Adjusting point -

Rack position 6.9+-0.5

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 33 30 36

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Test data Ex:

0000001501 RACK SENSOR

Nut A (B) Nut (C) Injection quantity decrease direction 1. Driven side rack limit mechanism adjustment procedure (for row R) (1)Set the rack limit at adjusting point A using the two nuts (A) and (B) on the driven side end of the rack.
----------

----------

0000001601 RACK SENSOR

Plate A (B) Nut (C) Injection quantity increase direction 1. Drive side rack limit mechanism adjustment procedure (for row L) (1)Set the rack limit at adjusting point A using the plate (A) above the drive side rack and the nut (B).
----------

----------