Fuel injectors
  1. Home
  2. injection
  3. #1066844520

106684-4520 ZEXEL 9 400 613 016 BOSCH INJECTION-PUMP ASSEMBLY 9400613016 1066844520 35a6501090


106684-4520 INJECTION-PUMP ASSEMBLY
Rating:
8
Buy INJECTION-PUMP ASSEMBLY 106684-4520 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 613 016 9400613016
ZEXEL 106684-4520 1066844520
MITSUBISHI-HEAV 35A6501090 35a6501090

Service parts 106684-4520 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106068-4160
3. GOVERNOR
4. SUPPLY PUMP 105237-1690
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105664-0670
7. COUPLING PLATE 156638-2420
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-6061
11. Nozzle and Holder 35A61-01050
12. Open Pre:MPa(Kqf/cm2) 22.0{224}
13. NOZZLE-HOLDER 105040-5110
14. NOZZLE 105025-3830
15. NOZZLE SET

Include in #1:

106684-4520 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 016 9400613016
ZEXEL 106684-4520 1066844520
MITSUBISHI-HEAV 35A6501090 35a6501090


Zexel num
Bosch num
Firm num
Name
106684-4520 
9 400 613 016 
35A6501090  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6A3 K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-4-1000
Overflow valve   131424-3420
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Opposite to the driving side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   13.4
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   460 451 469
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Rack limit   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   6.4+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   21 18 24
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Timing setting

Test data 106684-4520
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(110deg)




Have questions with 106684-4520?





Group cross 106684-4520 ZEXEL

Mitsubishi-Heav 

106684-4500  
9 400 617 689 
3266500310 
INJECTION-PUMP ASSEMBLY
S12A2
106684-4510  

106684-4511 
 
3626501310 
INJECTION-PUMP ASSEMBLY
S6B
106684-4511  
9 400 617 690 
3626511310 
INJECTION-PUMP ASSEMBLY
S6B
106684-4520  
9 400 613 016 
35A6501090 
INJECTION-PUMP ASSEMBLY
S6A3
106684-4530  
9 400 617 691 
35A6501250 
INJECTION-PUMP ASSEMBLY
S6B
106684-4540  

106684-4541 
9 400 617 692 
3266500210 
INJECTION-PUMP ASSEMBLY
S12A2
106684-4541  

106684-4542 
F 019 Z20 203 
3266500270 
INJECTION-PUMP ASSEMBLY
S12A2
106684-4542  
F 01G 09U 1J7 
3266510270 
INJECTION-PUMP ASSEMBLY
S12A2
106684-4550  

106684-4551 
9 400 613 486 
3266500220 
INJECTION-PUMP ASSEMBLY
S12A2
106684-4551  
F 019 Z20 204 
 
INJECTION-PUMP ASSEMBLY
S12A2

Mitsubishi-Heav 

106684-4551  

106684-4552 
F 019 Z20 204 
3266500280 
INJECTION-PUMP ASSEMBLY
S12A2
106684-4552  
F 01G 09U 1J8 
3266510280 
INJECTION-PUMP ASSEMBLY
S12A2
Back to top