106682-4601 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066824601

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106682-4601 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106682-4601 1066824601

Service parts 106682-4601 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106068-2210

3. GOVERNOR 105447-0870

4. SUPPLY PUMP 105237-4260

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105664-0340

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105111-4402

11. Nozzle and Holder 6212-11-3202

12. Open Pre:MPa(Kqf/cm2) 24.5{250}

13. NOZZLE-HOLDER 105041-7122

14. NOZZLE 105015-8070

15. NOZZLE SET

Include in #1:

106682-4601 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106682-4601 1066824601

Zexel num

Bosch num

Firm num

Name

106682-4601

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8130

Bosch type code EFEP215A

Nozzle 105780-0050

Bosch type code DN6TD119NP1T

Nozzle holder 105780-2090

Bosch type code EFEP215

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-4-1000

Overflow valve 131424-3420

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.5 3.45 3.55

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 13.9

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 423 418 428

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 13.9

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 440 435 445

Fixing the rack *

Injection quantity adjustment_03

Adjusting point C

Rack position 5.3+-0.5

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 17 15.5 18.5

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Minimum - maximum speed specification (2)Target notch: K (3)RACK LIMIT: RAL (4)Idle sub spring setting: L1. (5)Variable speed specification: idling adjustment (6)Main spring setting
----------
K=12 RAL=14.7+0.2mm L1=5.3-0.5mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Set the pump speed at aa (2)Set speed at bb (setting at shipping). (3)Stopper bolt setting
----------
aa=750r/min bb=900r/min
----------
a=9deg+-5deg b=16deg+-5deg c=30deg+-5deg