106682-3110 ZEXEL 9 400 617 526 BOSCH INJECTION-PUMP ASSEMBLY 9400617526 1066823110 220206261a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106682-3110 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 526 9400617526

ZEXEL 106682-3110 1066823110

HINO 220206261A 220206261a

Service parts 106682-3110 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106068-3921

3. GOVERNOR 105407-7921

4. SUPPLY PUMP 105237-5680

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105664-0970

7. COUPLING PLATE 156639-3420

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-8690

11. Nozzle and Holder 23600-3610A

12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}

13. NOZZLE-HOLDER 105030-3711

14. NOZZLE

15. NOZZLE SET 105019-2890

Include in #1:

106682-3110 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 526 9400617526

ZEXEL 106682-3110 1066823110

HINO 220206261A 220206261a

Zexel num

Bosch num

Firm num

Name

106682-3110

9 400 617 526

220206261A HINO

INJECTION-PUMP ASSEMBLY
P11B-TI K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8130

Bosch type code EFEP215A

Nozzle 105780-0050

Bosch type code DN6TD119NP1T

Nozzle holder 105780-2090

Bosch type code EFEP215

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-4-1000

Overflow valve 134424-0820

Overflow valve opening pressure kPa 127 107 147

Overflow valve opening pressure kgf/cm2 1.3 1.1 1.5

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.3 3.27 3.33

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.75 60.25

Difference between angles 2
Cyl.1-2 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cal 1-3 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-5 deg. 300 299.75 300.25

Injection quantity adjustment

Adjusting point A

Rack position 14.7

Pump speed r/min 1150 1150 1150

Average injection quantity mm3/st. 426 423 429

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Boost pressure kPa 193 193

Boost pressure mmHg 1450 1450

Injection quantity adjustment_02

Adjusting point C

Rack position 6.2+-0.5

Pump speed r/min 285 285 285

Average injection quantity mm3/st. 12 10 14

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_03

Adjusting point D

Rack position R1(10.8)

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 194.5 191.5 197.5

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 700 700 700

Rack position R1(10.8)

Boost pressure kPa 33.3 30.6 36

Boost pressure mmHg 250 230 270

Boost compensator adjustment_02

Pump speed r/min 700 700 700

Rack position R2(14.7)

Boost pressure kPa 180 180 180

Boost pressure mmHg 1350 1350 1350

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator excessive fuel lever at operation: L1 (at 0 boost pressure) (4)Boost compensator stroke: BCL (5)Damper spring setting
----------
K=11 L1=16.1+-0.1mm BCL=(3.9)mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=21deg+-5deg b=42deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Normal (2)Use the hole at R = aa (3)Position where contacts inner boss. (4)Position where contacts outer boss.
----------
aa=23mm
----------
a=27deg+-5deg b=53deg+-5deg c=(11deg)

0000001101

N:Normal B:When boosted (1)Rack position = aa at boost pressure 0. (2)Use the hole at R = bb (3)Stopper bolt setting (4)Drive side
----------
aa=16.1+-0.1mm bb=30mm
----------
a=(20deg) b=(15deg)

0000001501 Q ADJUSTMENT PIPING

Fuel hose adjusting procedure Fuel inlet hose A Fuel inlet hose B Fuel hose C ( (for bypass) (D) Overflow valve 1. Because the pump gallery is divided into two, be careful of the fuel piping. (1)Connect the fuel inlet hose to port (a). (2)Connect the fuel hose (for bypass) to ports (b) and (c). (3)Assemble the overflow valve (D) to the fuel outlet hose and connect to port (d).
----------

----------

Timing setting

(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=20deg
----------
a=(50deg)