106676-2260 ZEXEL 9 400 612 007 BOSCH INJECTION-PUMP ASSEMBLY 9400612007 1066762260 me158626

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106676-2260 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 007 9400612007

ZEXEL 106676-2260 1066762260

MITSUBISHI ME158626 me158626

Service parts 106676-2260 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-1430

3. GOVERNOR 105407-7390

4. SUPPLY PUMP 105207-1200

5. AUTOM. ADVANCE MECHANIS 105681-2300

6. COUPLING PLATE 105663-0550

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-7110

11. Nozzle and Holder ME056473

12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}

13. NOZZLE-HOLDER 105031-4530

14. NOZZLE

105015-6150

15. NOZZLE SET

Include in #1:

106676-2260 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 612 007 9400612007

ZEXEL 106676-2260 1066762260

MITSUBISHI ME158626 me158626

Zexel num

Bosch num

Firm num

Name

106676-2260

9 400 612 007

ME158626 MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D24T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-4620

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.8 4.75 4.85

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 10.5

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 160 157 163

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Boost pressure kPa 29.3 29.3

Boost pressure mmHg 220 220

Injection quantity adjustment_02

Adjusting point B

Rack position 6+-0.5

Pump speed r/min 425 425 425

Average injection quantity mm3/st. 8 5.4 10.6

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 750 750 750

Rack position R1-1.6

Boost pressure kPa 4 1.3 6.7

Boost pressure mmHg 30 10 50

Boost compensator adjustment_02

Pump speed r/min 750 750 750

Rack position R1(10.5)

Boost pressure kPa 16 16 16

Boost pressure mmHg 120 120 120

Timer adjustment

Pump speed r/min 0

Advance angle deg. 2.5 2 3

Load 4/4

Timer adjustment_02

Pump speed r/min 300

Advance angle deg. 2.5 2 3

Load 4/4

Remarks
Start

Timer adjustment_03

Pump speed r/min 600

Advance angle deg. 0 0 0

Load 0/4

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)At excess fuel lever operation (at boost pressure 0): L1 (4)Set idle sub-spring (5)Main spring setting (6)Boost compensator stroke (7)Rack difference between N = N1 and N = N2
----------
K=8 L1=10.4+-0.1mm N1=900r/min N2=300r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting (2)When pump speed set at aa (3)When pump speed set at bb
----------
aa=760r/min bb=920r/min
----------
a=(0deg)+-5deg b=(19deg)+-5deg c=(5deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)No return spring
----------

----------
a=48.5deg+-5deg b=53deg+-5deg

0000001101

N:Normal B:When boosted (1)Rack position = aa (point D) at boost pressure 0.
----------
aa=10.4+-0.1mm
----------
a=(18deg) b=(4deg)

0000001501 TAMPER PROOF

Tamperproofing-equipped boost compensator cover installation procedure (A) After adjusting the boost compensator, tighten the bolts to remove the heads. (1)Before adjusting the governor and the boost compensator, tighten the screw to the specified torque. (Tightening torque T = T1 maximum) (2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T2)
----------
T1=2.5N-m(0.25kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m)
----------

Timing setting

(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(6deg)