Fuel injectors
  1. Home
  2. injection
  3. #1066735050

106673-5050 ZEXEL 9 400 617 317 BOSCH INJECTION-PUMP ASSEMBLY 9400617317 1066735050 16790nb006


106673-5050 INJECTION-PUMP ASSEMBLY
Rating:
61
Buy INJECTION-PUMP ASSEMBLY 106673-5050 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 317 9400617317
ZEXEL 106673-5050 1066735050
NISSAN-DIESEL 16790NB006 16790nb006

Service parts 106673-5050 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-6850
3. GOVERNOR 105407-8430
4. SUPPLY PUMP 105237-4210
5. AUTOM. ADVANCE MECHANIS 105681-2840
6. COUPLING PLATE 105663-0650
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-6160
11. Nozzle and Holder 16600NB001
12. Open Pre:MPa(Kqf/cm2) 22.6{230}
13. NOZZLE-HOLDER 105041-4210
14. NOZZLE 105025-4110
15. NOZZLE SET

Include in #1:

106673-5050 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 317 9400617317
ZEXEL 106673-5050 1066735050
NISSAN-DIESEL 16790NB006 16790nb006


Zexel num
Bosch num
Firm num
Name
106673-5050 
9 400 617 317 
16790NB006  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
PF6TI K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   134424-4120
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   4.2 4.15 4.25
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   12.4
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   176.5 174.5 178.5
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Boost pressure kPa   76.6 76.6
Boost pressure mmHg   575 575
Injection quantity adjustment_02
Adjusting point   C
Rack position   6.8+-0.5
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   9 8 10
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   600 600 600
Rack position   R1-2.45
Boost pressure kPa   18.7 16 21.4
Boost pressure mmHg   140 120 160
Boost compensator adjustment_02
Pump speed r/min   600 600 600
Rack position   R1(12.4)
Boost pressure kPa   63.3 56.6 70
Boost pressure mmHg   475 425 525
Timer adjustment
Pump speed r/min   700-50
Advance angle deg.   0.3
Timer adjustment_02
Pump speed r/min   1050-50
Advance angle deg.   2 1.5 2.5
Remarks
Finish  

Test data Ex:

Governor adjustment

Test data 106673-5050
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL (4)Set idle sub-spring (5)Main spring setting
----------
K=17 BCL=2.45+-0.1mm
----------

Speed control lever angle

Test data 106673-5050
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=14deg+-5deg b=23deg+-5deg

Stop lever angle

Test data 106673-5050
N:Pump normal S:Stop the pump. (1)Normal (2)Use the hole at R = aa
----------
aa=55mm
----------
a=26.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 106673-5050
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(30deg)




Have questions with 106673-5050?





Group cross 106673-5050 ZEXEL

Nissan-Diesel 

106673-5000  
9 400 617 314 
1671496560 
INJECTION-PUMP ASSEMBLY
PE6TA
106673-5010  

106673-5011 
9 400 612 277 
1679096613 
INJECTION-PUMP ASSEMBLY
PE6T44
106673-5011  
F 01G 09U 1JE 
1679096613 
INJECTION-PUMP ASSEMBLY
PE6T44KJ
106673-5020  
9 400 617 315 
16790NB003 
INJECTION-PUMP ASSEMBLY
PF6TI
106673-5030  
9 400 617 316 
16790NB004 
INJECTION-PUMP ASSEMBLY
PF6TA
106673-5040  

106673-5041 
9 400 613 388 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

106673-5041  
9 400 613 510 
16790NB005 
INJECTION-PUMP ASSEMBLY
PF6TA
106673-5050  
9 400 617 317 
16790NB006 
INJECTION-PUMP ASSEMBLY
PF6TI
106673-5060  
9 400 617 318 
16790NB007 
INJECTION-PUMP ASSEMBLY
PF6TA
Back to top