106673-3210 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066733210

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106673-3210 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106673-3210 1066733210

Service parts 106673-3210 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-1860

3. GOVERNOR 105408-0930

4. SUPPLY PUMP 105217-1680

5. AUTOM. ADVANCE MECHANIS 105681-5860

6. COUPLING PLATE 105663-0540

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-5721

11. Nozzle and Holder 23600-1560A

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105041-4420

14. NOZZLE

105015-5330

15. NOZZLE SET

Include in #1:

106673-3210 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106673-3210 1066733210

Zexel num

Bosch num

Firm num

Name

106673-3210

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-0920

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.9 3.84 3.9

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.75 60.25

Difference between angles 2
Cyl.1-2 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cal 1-3 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-5 deg. 300 299.75 300.25

Injection quantity adjustment

Adjusting point A

Rack position 9.2

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 147 145 149

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the lever *

Boost pressure kPa 45.3 45.3

Boost pressure mmHg 340 340

Injection quantity adjustment_02

Adjusting point B

Rack position 10.35

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 181 178 184

Max. variation between cylinders % 0 -5 5

Fixing the lever *

Boost pressure kPa 45.3 45.3

Boost pressure mmHg 340 340

Injection quantity adjustment_03

Adjusting point C

Rack position 6+-0.5

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 11 8 14

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_04

Adjusting point D

Rack position 8.6

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 122 116 128

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_05

Adjusting point E

Rack position R1(11.8) +-0.1

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 175 175 195

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Remarks
Boost compensatory excess lever at excess.

Boost compensator adjustment

Pump speed r/min 600 600 600

Rack position 8.6

Boost pressure kPa 3.3 3.3 5.3

Boost pressure mmHg 25 25 40

Boost compensator adjustment_02

Pump speed r/min 600 600 600

Rack position 10.35

Boost pressure kPa 33.3 28 38.6

Boost pressure mmHg 250 210 290

Timer adjustment

Pump speed r/min 800--

Advance angle deg. 0 0 0

Load 3/4

Remarks
Start

Timer adjustment_02

Pump speed r/min 750

Advance angle deg. 0.3

Load 3/4

Timer adjustment_03

Pump speed r/min 980

Advance angle deg. 3.5 3.2 3.8

Load 4/4

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator excessive fuel lever at operation (at 0 boost pressure): L1 (4)Main spring setting (5)Set idle sub-spring (6)Boost compensator stroke: BCL (7)Set the torque spring.
----------
K=16 L1=R1(11.8)+-0.1mm BCL=1.75+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=10deg+-5deg b=22deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Contacts inner stopper. (2)Rack position aa or less, pump speed bb (3)Contacts outer stopper.
----------
aa=5.5mm bb=0r/min
----------
a=27deg+-5deg b=53deg+-5deg c=(11deg)

0000001101

N:Normal B:When boosted (1)Rack position = aa (point E) at boost pressure = 0. (2)Drive side
----------
aa=R1(11.8)+-0.1mm
----------
a=(15deg) b=(12deg)