106673-3062 ZEXEL 9 400 611 455 BOSCH INJECTION-PUMP ASSEMBLY 9400611455 1066733062 220205020b

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106673-3062 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 455 9400611455

ZEXEL 106673-3062 1066733062

HINO 220205020B 220205020b

Service parts 106673-3062 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-1210

3. GOVERNOR 105407-6610

4. SUPPLY PUMP 105207-1810

5. AUTOM. ADVANCE MECHANIS 105681-5520

6. COUPLING PLATE 105663-0540

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-5721

11. Nozzle and Holder 23600-1970B

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105031-5470

14. NOZZLE

105015-7020

15. NOZZLE SET

Include in #1:

106673-3062 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 455 9400611455

ZEXEL 106673-3062 1066733062

HINO 220205020B 220205020b

Zexel num

Bosch num

Firm num

Name

106673-3062

9 400 611 455

220205020B HINO

INJECTION-PUMP ASSEMBLY
K13C-TJ K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-0920

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-4-2-6- 3-5

Pre-stroke mm 4.4 4.34 4.4

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.75 60.25

Difference between angles 2
Cyl.1-2 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cal 1-3 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-5 deg. 300 299.75 300.25

Injection quantity adjustment

Adjusting point A

Rack position 9.5

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 204 202 206

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the rack *

Boost pressure kPa 167 167

Boost pressure mmHg 1250 1250

Injection quantity adjustment_02

Adjusting point C

Rack position 5.6+-0.5

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 11 8 14

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 550 550 550

Rack position R1-2.25

Boost pressure kPa 26.7 26.7 26.7

Boost pressure mmHg 200 200 200

Boost compensator adjustment_02

Pump speed r/min 550 550 550

Rack position R1-1

Boost pressure kPa 103 100.3 103

Boost pressure mmHg 770 750 770

Boost compensator adjustment_03

Pump speed r/min 550 550 550

Rack position R1(10.45 )

Boost pressure kPa 153 153 153

Boost pressure mmHg 1150 1150 1150

Timer adjustment

Pump speed r/min -

Advance angle deg. 0 0 0

Remarks
Measure speed (beginning of operation).

Timer adjustment_02

Pump speed r/min -

Advance angle deg. 2 1.7 2.3

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator excessive fuel lever at operation (at 0 boost pressure): L1 (4)Boost compensator stroke: BCL (5)Set idle sub-spring
----------
K=4 L1=12+-0.1mm BCL=2.25+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting (2)Stopper bolt setting (3)When pump speed set at aa (4)Set the pump speed at bb (at delivery)
----------
aa=750r/min bb=900r/min
----------
a=2deg+-5deg b=20deg+-5deg c=5deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Normal (2)Contacts inner stopper. Rack position aa or less, speed = bb (3)Contacts outer boss.
----------
aa=5.1mm bb=0r/min
----------
a=27deg+-5deg b=53deg+-5deg cc=(11deg)

0000001101

N:Normal B:When boosted (1)Rack position = aa (point E) at boost pressure = 0. (2)Drive side
----------
aa=12+-0.1mm
----------
a=(15deg) b=(14deg)+-5deg