106671-6753 ZEXEL F 01G 09U 1F4 BOSCH INJECTION-PUMP ASSEMBLY f01g09u1f4 1066716753 1156035004

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106671-6753 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 09U 1F4 f01g09u1f4

ZEXEL 106671-6753 1066716753

ISUZU 1156035004 1156035004

Service parts 106671-6753 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-6300

3. GOVERNOR 105407-8453

4. SUPPLY PUMP

105237-4421

5. AUTOM. ADVANCE MECHANIS 105681-6100

6. COUPLING PLATE 105664-2011

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-8310

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 18.1(185)22.1(225)

13. NOZZLE-HOLDER 105041-2082

14. NOZZLE

15. NOZZLE SET 105019-2840

Include in #1:

106671-6753 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 01G 09U 1F4 f01g09u1f4

ZEXEL 106671-6753 1066716753

ISUZU 1156035004 1156035004

Zexel num

Bosch num

Firm num

Name

106671-6753

F 01G 09U 1F4

1156035004 ISUZU

INJECTION-PUMP ASSEMBLY
6HK1TQC K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-4320

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 255 255 255

Tester oil delivery pressure kgf/cm2 2.6 2.6 2.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.4 3.37 3.43

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.75 60.25

Difference between angles 2
Cal 1-3 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cyl.1-2 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-4 deg. 300 299.75 300.25

Injection quantity adjustment

Adjusting point A

Rack position 10.7

Pump speed r/min 1150 1150 1150

Average injection quantity mm3/st. 97.5 96.5 98.5

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Boost pressure kPa 120 120

Boost pressure mmHg 900 900

Injection quantity adjustment_02

Adjusting point C

Rack position 7.8+-0.5

Pump speed r/min 425 425 425

Average injection quantity mm3/st. 13.5 10.3 16.7

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Injection quantity adjustment_03

Adjusting point E

Rack position 10.9++

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 125 115 135

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Rack limit *

Boost compensator adjustment

Pump speed r/min 500 500 500

Rack position R1-1.05

Boost pressure kPa 45.3 41.3 49.3

Boost pressure mmHg 340 310 370

Boost compensator adjustment_02

Pump speed r/min 500 500 500

Rack position R1(10.7)

Boost pressure kPa 107 100.3 113.7

Boost pressure mmHg 800 750 850

Timer adjustment

Pump speed r/min (N1+50)- -

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min N1(500)

Advance angle deg. 0 -0.5 0

Timer adjustment_03

Pump speed r/min (670)+-2 5

Advance angle deg. -2.5 -3 -2

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Deliver with positive torque control spring not operating (4)RACK LIMIT (5)Boost compensator stroke: BCL (6)Main spring setting (7)Set idle sub-spring
----------
K=6 BCL=1.05+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle S:Stop (1)Use the hole at R = aa (2)Stopper bolt setting
----------
aa=70mm
----------
a=7deg+-5deg b=31deg+-3deg c=30deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Normal (2)Use the hole at R = aa (3)Rack position bb, pump speed cc (seal at delivery)
----------
aa=23mm bb=1-0.5mm cc=0r/min
----------
a=15deg+-5deg b=70deg+-5deg

0000001501 TAMPER PROOF

Tamperproofing-equipped boost compensator cover installation procedure (A) After adjusting the boost compensator, tighten the bolts to remove the heads. (1)Before adjusting the governor and the boost compensator, tighten the screw to the specified torque. (Tightening torque T = T1 maximum) (2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T2)
----------
T1=2.5N-m(0.25kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m)
----------

Timing setting

(1)Pump vertical direction (2)Positions of coupling's threaded installation holes at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(50deg)