106671-5560 ZEXEL 9 400 616 864 BOSCH INJECTION-PUMP ASSEMBLY 9400616864 1066715560 1679096605

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106671-5560 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 864 9400616864

ZEXEL 106671-5560 1066715560

NISSAN-DIESEL 1679096605 1679096605

Service parts 106671-5560 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-1360

3. GOVERNOR 105427-0460

4. SUPPLY PUMP 105217-1860

5. AUTOM. ADVANCE MECHANIS 105681-2200

6. COUPLING PLATE 105663-0650

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-7670

11. Nozzle and Holder 16600-96611

12. Open Pre:MPa(Kqf/cm2) 18.6{190}/22.6{230}

13. NOZZLE-HOLDER 105041-4190

14. NOZZLE

15. NOZZLE SET 105019-0471

Include in #1:

106671-5560 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 864 9400616864

ZEXEL 106671-5560 1066715560

NISSAN-DIESEL 1679096605 1679096605

Zexel num

Bosch num

Firm num

Name

106671-5560

9 400 616 864

1679096605 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
PF6T24 * K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-0020

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.9 3.85 3.95

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 12

Pump speed r/min 1050 1050 1050

Average injection quantity mm3/st. 175.5 173.5 177.5

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Boost pressure kPa 77.3 77.3

Boost pressure mmHg 580 580

Injection quantity adjustment_02

Adjusting point C

Rack position 6.5+-0.5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 14.5 13.5 15.5

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 300 300 300

Rack position 9.6

Boost pressure kPa 6.7 1.4 12

Boost pressure mmHg 50 10 90

Boost compensator adjustment_02

Pump speed r/min 300 300 300

Rack position 12

Boost pressure kPa 37.3 34.6 40

Boost pressure mmHg 280 260 300

Boost compensator adjustment_03

Pump speed r/min 300 300 300

Rack position (13.7)

Boost pressure kPa 64 64 64

Boost pressure mmHg 480 480 480

Timer adjustment

Pump speed r/min 750--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 700

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1050

Advance angle deg. 2 1.5 2.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Minimum - maximum speed specification (speed control lever full position) (2)Target notch: K (3)Boost compensator stroke: BCL (4)Boost compensator excessive fuel lever at operation: L1 (at 0 boost pressure)
----------
K=17 BCL=(4.1)mm L1=12.5+0.2mm
----------